• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio in miniatura / testa cilindrica / albero sottile / doppio offset

Punzoni da taglio in miniatura / testa cilindrica / albero sottile / doppio offset

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • FLANGE
  • SKH51
  • POWDER HSS

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
A-PHTWA1.6-[20,​25,​30,​35,​40,​50,​60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-PHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-PHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-PHTWA1.6-LMT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-PHTWA2.0-[20,​25,​30,​35,​40,​50,​60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-PHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-PHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-PHTWA2.0-LMT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-PHTWA2.5-[20,​25,​30,​35,​40,​50,​60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-PHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-PHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-PHTWA2.5-LMT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-SHTWA1.6-[20,​25,​30,​35,​40,​50,​60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-SHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-SHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-SHTWA1.6-LMT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
A-SHTWA2.0-[20,​25,​30,​35,​40,​50,​60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-SHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-SHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-SHTWA2.0-LMT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
A-SHTWA2.5-[20,​25,​30,​35,​40,​50,​60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-SHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-SHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
A-SHTWA2.5-LMT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
PHTWA1.6-[20,​25,​30,​35,​40,​50,​60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
PHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
PHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
PHTWA1.6-LMT[20-49.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
PHTWA2.0-[20,​25,​30,​35,​40,​50,​60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
PHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
PHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
PHTWA2.0-LMT[20-49.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
PHTWA2.5-[20,​25,​30,​35,​40,​50,​60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
PHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
PHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
PHTWA2.5-LMT[20-49.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
SHTWA1.6-[20,​25,​30,​35,​40,​50,​60]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
SHTWA1.6-LC[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
SHTWA1.6-LCT[20-59.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
SHTWA1.6-LMT[20-49.9/0.1]-P[0.3-1.56/0.01]-B[1-10/0.1]-V[0.31-1.59/0.01]-F[2-20/0.1]
SHTWA2.0-[20,​25,​30,​35,​40,​50,​60]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
SHTWA2.0-LC[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
SHTWA2.0-LCT[20-59.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
SHTWA2.0-LMT[20-49.9/0.1]-P[0.5-1.96/0.01]-B[1-10/0.1]-V[0.51-1.99/0.01]-F[2-20/0.1]
SHTWA2.5-[20,​25,​30,​35,​40,​50,​60]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
SHTWA2.5-LC[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
SHTWA2.5-LCT[20-59.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
SHTWA2.5-LMT[20-49.9/0.1]-P[0.8-2.46/0.01]-B[1-10/0.1]-V[0.51-2.99/0.01]-F[2-35/0.1]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSMaterial Shank diameter D tolerance D (Shank diameter)
(mm) 		P (Tip dimension)
(mm) 		L (L dimension)
(mm) 		B (Tip length)
(mm) 		F (Length from tip end to second step R)
(mm) 		LC (Full length alteration)
(mm) 		LCT (Head thickness tolerance change + Total length alteration)
(mm) 		LMT (Head thickness tolerance change + Total length alteration)
(mm) 		V (Second step tip diameter)
(mm)
1 Preventivo 10Powdered high-speed steel+0.005/01.60.3 ～ 1.5620 ～ 601 ～ 102 ～ 20---0.31 ～ 1.59
1 Preventivo 10Powdered high-speed steel+0.005/01.60.3 ～ 1.56-1 ～ 102 ～ 2020 ～ 59.9--0.31 ～ 1.59
1 Preventivo 10Powdered high-speed steel+0.005/01.60.3 ～ 1.56-1 ～ 102 ～ 20-20 ～ 59.9-0.31 ～ 1.59
1 Preventivo 10Powdered high-speed steel+0.005/01.60.3 ～ 1.56-1 ～ 102 ～ 20--20 ～ 59.90.31 ～ 1.59
1 Preventivo 10Powdered high-speed steel+0.005/02.00.5 ～ 1.9620 ～ 601 ～ 102 ～ 20---0.51 ～ 1.99
1 Preventivo 10Powdered high-speed steel+0.005/02.00.5 ～ 1.96-1 ～ 102 ～ 2020 ～ 59.9--0.51 ～ 1.99
1 Preventivo 10Powdered high-speed steel+0.005/02.00.5 ～ 1.96-1 ～ 102 ～ 20-20 ～ 59.9-0.51 ～ 1.99
1 Preventivo 10Powdered high-speed steel+0.005/02.00.5 ～ 1.96-1 ～ 102 ～ 20--20 ～ 59.90.51 ～ 1.99
1 Preventivo 10Powdered high-speed steel+0.005/02.50.8 ～ 2.4620 ～ 601 ～ 102 ～ 35---0.51 ～ 2.99
1 Preventivo 10Powdered high-speed steel+0.005/02.50.8 ～ 2.46-1 ～ 102 ～ 3520 ～ 59.9--0.51 ～ 2.99
1 Preventivo 10Powdered high-speed steel+0.005/02.50.8 ～ 2.46-1 ～ 102 ～ 35-20 ～ 59.9-0.51 ～ 2.99
1 Preventivo 10Powdered high-speed steel+0.005/02.50.8 ～ 2.46-1 ～ 102 ～ 35--20 ～ 59.90.51 ～ 2.99
1 Preventivo 10SKH51 Equivalent+0.005/01.60.3 ～ 1.5620 ～ 601 ～ 102 ～ 20---0.31 ～ 1.59
1 Preventivo 10SKH51 Equivalent+0.005/01.60.3 ～ 1.56-1 ～ 102 ～ 2020 ～ 59.9--0.31 ～ 1.59
1 Preventivo 10SKH51 Equivalent+0.005/01.60.3 ～ 1.56-1 ～ 102 ～ 20-20 ～ 59.9-0.31 ～ 1.59
1 Preventivo 10SKH51 Equivalent+0.005/01.60.3 ～ 1.56-1 ～ 102 ～ 20--20 ～ 59.90.31 ～ 1.59
1 Preventivo 10SKH51 Equivalent+0.005/02.00.5 ～ 1.9620 ～ 601 ～ 102 ～ 20---0.51 ～ 1.99
1 Preventivo 10SKH51 Equivalent+0.005/02.00.5 ～ 1.96-1 ～ 102 ～ 2020 ～ 59.9--0.51 ～ 1.99
1 Preventivo 10SKH51 Equivalent+0.005/02.00.5 ～ 1.96-1 ～ 102 ～ 20-20 ～ 59.9-0.51 ～ 1.99
1 Preventivo 10SKH51 Equivalent+0.005/02.00.5 ～ 1.96-1 ～ 102 ～ 20--20 ～ 59.90.51 ～ 1.99
1 Preventivo 10SKH51 Equivalent+0.005/02.50.8 ～ 2.4620 ～ 601 ～ 102 ～ 35---0.51 ～ 2.99
1 Preventivo 10SKH51 Equivalent+0.005/02.50.8 ～ 2.46-1 ～ 102 ～ 3520 ～ 59.9--0.51 ～ 2.99
1 Preventivo 10SKH51 Equivalent+0.005/02.50.8 ～ 2.46-1 ～ 102 ～ 35-20 ～ 59.9-0.51 ～ 2.99
1 Preventivo 10SKH51 Equivalent+0.005/02.50.8 ～ 2.46-1 ～ 102 ～ 35--20 ～ 59.90.51 ～ 2.99
1 Preventivo 10Powdered high-speed steelm51.60.3 ～ 1.5620 ～ 601 ～ 102 ～ 20---0.31 ～ 1.59
1 Preventivo 10Powdered high-speed steelm51.60.3 ～ 1.56-1 ～ 102 ～ 2020 ～ 59.9--0.31 ～ 1.59
1 Preventivo 10Powdered high-speed steelm51.60.3 ～ 1.56-1 ～ 102 ～ 20-20 ～ 59.9-0.31 ～ 1.59
1 Preventivo 10Powdered high-speed steelm51.60.3 ～ 1.56-1 ～ 102 ～ 20--20 ～ 49.90.31 ～ 1.59
1 Preventivo 10Powdered high-speed steelm52.00.5 ～ 1.9620 ～ 601 ～ 102 ～ 20---0.51 ～ 1.99
1 Preventivo 10Powdered high-speed steelm52.00.5 ～ 1.96-1 ～ 102 ～ 2020 ～ 59.9--0.51 ～ 1.99
1 Preventivo 10Powdered high-speed steelm52.00.5 ～ 1.96-1 ～ 102 ～ 20-20 ～ 59.9-0.51 ～ 1.99
1 Preventivo 10Powdered high-speed steelm52.00.5 ～ 1.96-1 ～ 102 ～ 20--20 ～ 49.90.51 ～ 1.99
1 Preventivo 10Powdered high-speed steelm52.50.8 ～ 2.4620 ～ 601 ～ 102 ～ 35---0.51 ～ 2.99
1 Preventivo 10Powdered high-speed steelm52.50.8 ～ 2.46-1 ～ 102 ～ 3520 ～ 59.9--0.51 ～ 2.99
1 Preventivo 10Powdered high-speed steelm52.50.8 ～ 2.46-1 ～ 102 ～ 35-20 ～ 59.9-0.51 ～ 2.99
1 Preventivo 10Powdered high-speed steelm52.50.8 ～ 2.46-1 ～ 102 ～ 35--20 ～ 49.90.51 ～ 2.99
1 Preventivo 10SKH51 Equivalentm51.60.3 ～ 1.5620 ～ 601 ～ 102 ～ 20---0.31 ～ 1.59
1 Preventivo 10SKH51 Equivalentm51.60.3 ～ 1.56-1 ～ 102 ～ 2020 ～ 59.9--0.31 ～ 1.59
1 Preventivo 10SKH51 Equivalentm51.60.3 ～ 1.56-1 ～ 102 ～ 20-20 ～ 59.9-0.31 ～ 1.59
1 Preventivo 10SKH51 Equivalentm51.60.3 ～ 1.56-1 ～ 102 ～ 20--20 ～ 49.90.31 ～ 1.59
1 Preventivo 10SKH51 Equivalentm52.00.5 ～ 1.9620 ～ 601 ～ 102 ～ 20---0.51 ～ 1.99
1 Preventivo 10SKH51 Equivalentm52.00.5 ～ 1.96-1 ～ 102 ～ 2020 ～ 59.9--0.51 ～ 1.99
1 Preventivo 10SKH51 Equivalentm52.00.5 ～ 1.96-1 ～ 102 ～ 20-20 ～ 59.9-0.51 ～ 1.99
1 Preventivo 10SKH51 Equivalentm52.00.5 ～ 1.96-1 ～ 102 ～ 20--20 ～ 49.90.51 ～ 1.99
1 Preventivo 10SKH51 Equivalentm52.50.8 ～ 2.4620 ～ 601 ～ 102 ～ 35---0.51 ～ 2.99
1 Preventivo 10SKH51 Equivalentm52.50.8 ～ 2.46-1 ～ 102 ～ 3520 ～ 59.9--0.51 ～ 2.99
1 Preventivo 10SKH51 Equivalentm52.50.8 ～ 2.46-1 ～ 102 ～ 35-20 ～ 59.9-0.51 ～ 2.99
1 Preventivo 10SKH51 Equivalentm52.50.8 ～ 2.46-1 ～ 102 ～ 35--20 ～ 49.90.51 ～ 2.99

Loading...

  1. 1
 

Informazioni di base

Heavy-load punches No Shank type Double-stepped Jector None
Tip shape A Surface treatment None Shank (mounting part) shape Standard
T (Head thickness/plate thickness)(mm) 3

Configura

Ripristina

48Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Material

    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Shank diameter D tolerance

    • +0.005/0
    • m5

    Ripristina

  • D (Shank diameter)(mm)

    • 1.6
    • 2.0
    • 2.5

    Ripristina

  • P (Tip dimension)(mm)

     [0.3-2.46/0.01mmpezzi]

    Ripristina

  • L (L dimension)(mm)

    • 20
    • 25
    • 30
    • 35
    • 40
    • 50
    • 60

    Ripristina

  • B (Tip length)(mm)

     [1-10/0.1mmpezzi]

    Ripristina

  • F (Length from tip end to second step R)(mm)

     [2-35/0.1mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [20-59.9/0.1mmpezzi]

    Ripristina

  • LCT (Head thickness tolerance change + Total length alteration)(mm)

     [20-59.9/0.1mmpezzi]

    Ripristina

  • LMT (Head thickness tolerance change + Total length alteration)(mm)

     [20-59.9/0.1mmpezzi]

    Ripristina

  • V (Second step tip diameter)(mm)

     [0.31-2.99/0.01mmpezzi]

    Ripristina

  • Tipo

    • A-PHTWA
    • A-SHTWA
    • PHTWA
    • SHTWA

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.