TSC series carbide square end mill, 2-flute / 3.5D Flute Length model (SN-TSC-PEM2RL10-[40-50/1]-35)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
Dettagli del prodotto:
Codice articolo del costruttore: SN-TSC-PEM2RL10-[40-50/1]-35
Marca: MISUMI
Prezzo: Contattare l'helpdesk per un preventivo
Tempi di consegna: 8 giorni
Dati Tecnici:
Outer Diameter (D): 10 φ
Flute Length (ℓ): 35 mm
Shank Diameter (d): 10 mm
Overall Length (L): 80 mm
Length Under Neck (ℓ1): 40 ～ 50 mm
- TS
- General Steel
- 2 Flutes
- RL
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
SN-TSC-PEM2RL10-[40-50/1]-35
Codice componente
|
|---|
| SN-TSC-PEM2RL10-[40-50/1]-35 |
| Codice componente | Quantità minima d'ordine | Sconto volumi elevati | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 giorni | 10 | 35 | 10 | 80 | 40 ～ 50 | Flat Surface / Side Surface / Scanalatura / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ |
Loading...
Specifiche
Model Number
TSC-EM2RL (Standard) / TSC-PEM2RL (Sharp Edge)
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 0.5 | 1.75 | 45 | 4 | 1 | ● |
| 1 | 3.5 | 45 | 4 | 1 | ● |
| 1.5 | 5.25 | 45 | 4 | 1 | ● |
| 2 | 7 | 45 | 4 | 1 | ● |
| 3 | 10.5 | 45 | 6 | 1 | ● |
| 3.51 ~ 3.99 | 14 | 50 | 6 | 1 | □ |
| 4 | 14 | 50 | 6 | 1 | ● |
| 4.51 ~ 4.99 | 17.5 | 55 | 6 | 1 | □ |
| 5 | 17.5 | 55 |
6 |
1 | ● |
| 5.51 ~ 5.99 | 21 | 60 |
6 |
1 | □ |
| 6 | 21 | 60 |
6 |
2 | ● |
| 7.51 ~ 7.99 | 28 | 70 |
8 |
1 | □ |
| 8 | 28 | 70 |
8 |
2 | ● |
| 9.51 ~ 9.99 | 35 | 80 |
10 |
1 | □ |
| 10 | 35 | 80 |
10 |
2 | ● |
| 11.51 ~ 11.99 | 42 | 95 |
12 |
1 | □ |
| 12 | 42 | 95 |
12 |
2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
●The flute length is between that of regular flutes and long flutes, with a 3.5 times larger flute diameter.
Informazioni di base
| Work Material | General Steel / Heat-Treated Steel / Acciaio inox / Ghisa / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Tipo quadrato |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Configura
Proprietà di base
-
Outer Diameter (D)(φ)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Scanalatura
- Inclined Cutting
- Countersunk
-
Geometry
- Sharp Corner
- Con puntale
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
-
Tipo
- SN-TSC-EM2RL
- SN-TSC-PEM2RL
- SNR-TSC-EM2RL
- SNR-TSC-PEM2RL
- TSC-EM2RL
- TSC-PEM2RL
-
Flute Length (ℓ)(mm)
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 7 giorni o meno
- 8 giorni o meno
- 9 giorni o meno
- 13 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.