Deburring Brush with Grindstone: For Burr Removal on Irregular Surfaces, Shank Included
[Caratteristiche] Le pietre abrasive con rivestimento speciale lavorano in modo fluido e altamente resiliente sul pezzo Le basi delle sfere di lucidatura sono incassate e fissate nel manico, in modo da adattarsi perfettamente alle superfici irregolari.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
| Codice componente | Quantità minima d'ordine | Sconto volumi elevati | Total Length L (mm) | Outer Diameter D (mm) | Abrasive Grain | Particle Size (#) | Compatible Hole Diameter (Approximation) | Polishing Ball Length ℓ (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 19 giorni | 195 | 5 | AO / SC | 60 ～ 220 | 5.0 ~ 5.5 | 45 | ||
| 1 | 19 giorni | 195 | 5.5 | AO / SC | 60 ～ 220 | 5.5 ~ 6.0 | 45 | ||
| 1 | 19 giorni | 195 | 6.5 | AO / SC | 60 ～ 220 | 6.5 ~ 7.0 | 45 | ||
| 1 | 19 giorni | 195 | 7 | AO / SC | 60 ～ 220 | 7.0 ~ 7.5 | 45 | ||
| 1 | 19 giorni | 200 | 9 | AO / SC | 60 ～ 220 | 8.0 ~ 9.0 | 50 | ||
| 1 | 19 giorni | 200 | 10 | AO / SC | 60 ～ 220 | 9.0 ~ 10.0 | 50 | ||
| 1 | 19 giorni | 200 | 11 | AO / SC | 60 ～ 220 | 10.0 ~ 11.0 | 50 | ||
| 1 | 19 giorni | 210 | 12 | AO / SC | 60 ～ 220 | 11.0 ~ 12.0 | 60 | ||
| 1 | 19 giorni | 210 | 13 | AO / SC | 60 ～ 220 | 12.0 ~ 13.0 | 60 | ||
| 1 | 19 giorni | 210 | 14 | AO / SC | 60 ～ 220 | 13.0 ~ 14.0 | 60 | ||
| 1 | 19 giorni | 210 | 16 | AO / SC | 60 ～ 220 | 14.0 ~ 16.0 | 60 | ||
| 1 | 19 giorni | 210 | 18 | AO / SC | 60 ～ 220 | 16.0 ~ 18.0 | 60 | ||
| 1 | 19 giorni | 210 | 22 | AO / SC | 60 ～ 220 | 20.0 ~ 22.0 | 60 | ||
| 1 | 19 giorni | 210 | 25 | AO / SC | 60 ～ 220 | 22.0 ~ 24.0 | 60 |
Loading...
Specifiche
| Model Number | Outer Diameter D | Abrasive Grain | Particle Size (#) (selection) | Applicable Hole Diameter (Guideline) | Shank Diameter d | Shank Length s | Polishing Ball Length ℓ | Total Length L | Maximum Operating Rotation Speed (min-1) |
| FLEXH-SH | 5 | AO SC | 60 (Black), 120 (Red), 220 (Yellow) | 5.0 ~ 5.5 | 6 | 150 | 45 | 195 | 1,200 |
| 5.5 | 5.5 ~ 6.0 | ||||||||
| 6.5 | 6.5 ~ 7.0 | ||||||||
| 7 | 7.0 ~ 7.5 | ||||||||
| 9 | 8.0 ~ 9.0 | 50 | 200 | ||||||
| 10 | 9.0 ~ 10.0 | ||||||||
| 11 | 10.0 ~ 11.0 | ||||||||
| 12 | 11.0 ~ 12.0 | 60 | 210 | ||||||
| 13 | 12.0 ~ 13.0 | ||||||||
| 14 | 13.0 ~ 14.0 | ||||||||
| 16 | 14.0 ~ 16.0 | ||||||||
| 18 | 16.0 ~ 18.0 | ||||||||
| 20 | 18.0 ~ 20.0 | ||||||||
| 22 | 20.0 ~ 22.0 | ||||||||
| 25 | 22.0 ~ 24.0 |
[ ! ] The abrasive grain AO is nylon containing aluminum oxide abrasive (= material where aluminum oxide abrasive is mixed into nylon material).
[ ! ] The abrasive grain SC is nylon containing silicon carbide abrasive (= material where silicon carbide abrasive is mixed into nylon material).
Here for a selection guide and deburring brushes
Più Informazioni
● A φ6 shank is mounted to a deburring brush with an attached grindstone.
● Each grinding ball, with specially coated grindstones, fits to workpieces. With its ball-shaped grindstone, it contacts workpieces gently but works strongly.
● The center is securely fixed since the grinding ball part shaft is screwed into the handle and it tightly fits to an uneven surface with the flexible tip.
● The abrasive grain SC (silicon carbide) is suitable for grinding hard workpieces such as high-hardness steel, cast iron and carbon steel. The AO (aluminum oxide) is suitable for grinding soft workpieces such as aluminum, stainless steel and copper.
● Surface roughness by particle size after grinding is approximately 18 μm for #60, 12 μm for #120 and 6 μm for #220.
Informazioni di base
| Product Model | Tipo automatico | Commodity Contents | Spazzola | Maximum Rotation Speed(min-1) | 1,200 |
|---|---|---|---|---|---|
| Shank Diameter d(mm) | 6 | Shank Length s(mm) | 150 | Grain Size Name | 60-Black, 120-Red, 220-Yellow |
Configura
Proprietà di base
-
Total Length L(mm)
- 195
- 200
- 210
-
Outer Diameter D(mm)
-
Abrasive Grain
- AO
- SC
-
Particle Size (#)
-
Tipo
- FLEXH-SH
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 19 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.