Giunto superiore, T-1 a vite (Codici componente)
Designed for dissimilar metal joints, so it cannot be used for stainless steel pipes.
[Features]
· Wide selection of products for surface treatments.
· Prevents bolt from dropping out during construction work, allowing safe and quick operation.
· Due to recent environmental degradation affecting water supply, a high concentration of chlorine has been used for sterilization, significantly affecting pipes.
· As a result, we have developed and adopted a gasket with heat resistant and chlorine resistant properties.
· Because we offer a wide range of stainless steel SUS Top Systems, joining of mid to large diameter stainless steel piping is made easy via combinations of top joint epoxy-coated products and Nylon-coated products.
· Pipe treatment and joining are simpler and faster than when threaded fittings or weld joining is used.
· Structurally strong and flexible against pipe sagging and stretching (able to support loop piping, etc.).
· Fitting suppresses elastic flexibility, supporting the R-5 and R-11, by providing unevenness on the mating surface of the housing.
[Features]
· Wide selection of products for surface treatments.
· Prevents bolt from dropping out during construction work, allowing safe and quick operation.
· Due to recent environmental degradation affecting water supply, a high concentration of chlorine has been used for sterilization, significantly affecting pipes.
· As a result, we have developed and adopted a gasket with heat resistant and chlorine resistant properties.
· Because we offer a wide range of stainless steel SUS Top Systems, joining of mid to large diameter stainless steel piping is made easy via combinations of top joint epoxy-coated products and Nylon-coated products.
· Pipe treatment and joining are simpler and faster than when threaded fittings or weld joining is used.
· Structurally strong and flexible against pipe sagging and stretching (able to support loop piping, etc.).
· Fitting suppresses elastic flexibility, supporting the R-5 and R-11, by providing unevenness on the mating surface of the housing.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
- Dati prodotto
- Dati CAD non disponibili
Codice componente
|
|---|
| TOPJ-T-1-5X2B-R |
| TOPJ-T-1-5X2B-W |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Nominale | Nominale seconda estremità | Verniciatura superficie | |
|---|---|---|---|---|---|---|---|
71.94 € | 1 | 8 giorni | 5B(125A) | 2B(50A) | Rivestimento antiruggine principale (Estremità R) | ||
75.37 € | 1 | 12 giorni | 5B(125A) | 2B(50A) | Zincatura a caldo (Estremità W) |
Loading...
Informazioni di base
| Tipo | Giunto (Tipo diramazione e a vite) | Tubo applicabile | Tubo in acciaio | Fluidi applicabili | Acqua |
|---|---|---|---|---|---|
| Massima pressione di esercizio(MPa) | 2 | Materiale guarnizione | EPDM | Materiale corpo principale | Ghisa |
| Tipo bullone di serraggio | Dado per bullone |
Configura
Proprietà di base
-
Nominale seconda estremità
-
Verniciatura superficie
- Rivestimento antiruggine principale (Estremità R)
- Zincatura a caldo (Estremità W)
-
Tipo
- TOPJ-T-1
-
Nominale
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 7 giorni o meno
- 8 giorni o meno
- 12 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.