Stylus M2 Diamond Coated Ball
While ruby and most other commonly used styli ball materials are exposed to and suffer from abrasive or adhesive wear, diamond coated balls offer advantage over all these styli ball materials.
They will outlast ruby balls in everyday use and therefore pay off as a long term investment.
Additionally they are not subject to the adhesion of material particles when scanning for e.g. aluminium components.
When it comes to measure modern wear resistant coatings with a high surface hardness, diamond coated styli are essential to the success of the measurement, as ruby ball styli can already suffer massive wear in the first measurement cycle.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| K650240 |
| K650241 |
| K650242 |
| K650243 |
| K650244 |
| K650245 |
| K650246 |
| K650247 |
| K650248 |
| K650249 |
| K650250 |
| K650251 |
| K650252 |
| K650253 |
| K650254 |
| K650255 |
| K650256 |
| K650257 |
| K650258 |
| K650259 |
| K650260 |
| K651772 |
| K651773 |
| K651775 |
| K651925 |
| Codice componente | Relativo a |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Diametro sfera (mm) | Base Diametro (mm) | Materiale base | Description protocol system | Lunghezza (mm) | Qmark Code No. | Gambo Diametro (mm) | Shaft stem material | Thread | Thread 2 | 100x Magnification Range / Interval (mm) | Dimensioni tavola (mm) | Massa (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
630.00 € | 1 | 60 giorni | 1,05 | 4 | Acciaio inossidabile | 01-M3-DC1,05-L21,5-ML8,5/4,5-SWC1/0,8-BS4 | 21,5 | - | 1 | Carburo | M3 | 1,3 | 0,8 | 8,5 | 0,99 | |||
630.00 € | 1 | 60 giorni | 1,05 | 11 | Titanium | 01-M5-DC1,05-L22-ML13/4,7-SWC1/0,8-BTi11 | 22 | - | 1 | Carburo | M5 | 3,1 | 0,8 | 13 | 6,39 | |||
630.00 € | 1 | 60 giorni | 1,05 | - | Acciaio inossidabile | 01-M2-DC1,05-L10-ML6-SWC0,8-BS3 | 10 | - | 0,7 | Carburo | M2 | 1,3 | - | 6 | 0,25 | |||
630.00 € | 1 | 60 giorni | 1,05 | - | Acciaio inossidabile | 01-M2-DC1,05-L20-ML7-SWC0,7-BS3 | 20 | - | 0,8 | Carburo | M2 | 1,3 | - | 7 | 0,5 | |||
630.00 € | 1 | 60 giorni | 1,05 | 4 | Acciaio inossidabile | 01-M3-DC1,05-L10-ML5-SWC0,8-BS4 | 10 | - | 0,8 | Carburo | M3 | 1,3 | - | 5 | 0,53 | |||
630.00 € | 1 | 60 giorni | 2,05 | - | Acciaio inossidabile | 01-M2-DC2,05-L20-ML15-SWC1-BS3 | 20 | - | 1 | Carburo | M2 | 1,3 | - | 15 | 0,45 | |||
630.00 € | 1 | 60 giorni | 2,05 | 4 | Acciaio inossidabile | 01-M3-DC2,05-L20-ML12,5-SWC1,5-BS4 | 20 | - | 1,5 | Carburo | M3 | 1,3 | - | 12,5 | 1,08 | |||
630.00 € | 1 | 60 giorni | 2,05 | 4 | Acciaio inossidabile | 01-M3-DC2,05-L30-ML22,5-SWC1,5-BS4 | 30 | - | 1,5 | Carburo | M3 | 1,3 | - | 22,5 | 1,28 | |||
630.00 € | 1 | 60 giorni | 2,05 | 11 | Titanium | 01-M5-DC2,05-L32,5-ML23,5-SWC1,5-BTi11 | 32,5 | - | 1,5 | Carburo | M5 | 3,1 | - | 23,5 | 6,82 | |||
630.00 € | 1 | 60 giorni | 2,05 | 11 | Titanium | 01-M5-DC2,05-L43-ML18-SWC4/1,5-BTi11 | 43 | ATG-3033-DC | 1,5 | Carburo | M5 | 3,1 | - | 18 | 4,49 | |||
630.00 € | 1 | 60 giorni | 3,05 | - | Acciaio inossidabile | 01-M2-DC3,05-L20-ML17-SWC1,5-BS3 | 20 | - | 1,5 | Carburo | M2 | 1,3 | - | 17 | 0,72 | |||
630.00 € | 1 | 5 giorni | 3,05 | 4 | Acciaio inossidabile | 01-M3-DC3,05-L20-ML15,5SWC1,5-BS4 | 20 | - | 1,5 | Carburo | M3 | 1,3 | - | 15,5 | 1,25 | |||
630.00 € | 1 | 5 giorni | 3,05 | 4 | Acciaio inossidabile | 01-M3-DC3,05-L50-ML42,5-SWC2-BS4 | 50 | - | 2 | Carburo | M3 | 1,3 | - | 42,5 | 2,49 | |||
630.00 € | 1 | 60 giorni | 3,05 | 11 | Titanium | 01-M5-DC3,05-L32-ML22-SWC2-BTi11 | 32 | - | 2 | Carburo | M5 | 3,1 | - | 22 | 4,29 | |||
630.00 € | 1 | 60 giorni | 3,05 | 11 | Titanium | 01-M5-DC3,05-L48,5-ML38,5-SWC2-BTi11 | 48,5 | - | 2 | Carburo | M5 | 3,1 | - | 38,5 | 4,98 | |||
792.00 € | 1 | 60 giorni | 5,05 | - | Acciaio inossidabile | 01-M2-DC5,05-L40-ML40-SWC2,5-BS3 | 40 | - | 2,5 | Carburo | M2 | 1,3 | - | 40 | 2,89 | |||
792.00 € | 1 | 60 giorni | 5,05 | 4 | Acciaio inossidabile | 01-M3-DC5,05-L40-ML40-SWC2-BS4 | 40 | - | 2 | Carburo | M3 | 1,3 | - | 40 | 2,49 | |||
792.00 € | 1 | 60 giorni | 5,05 | 4 | Acciaio inossidabile | 01-M3-DC5,05-L50-ML50-SWC2-BS4 | 50 | - | 2 | Carburo | M3 | 1,3 | - | 50 | 2,98 | |||
792.00 € | 1 | 60 giorni | 5,05 | 11 | Titanium | 01-M5-DC5,05-L47,5-ML37,5-SWC3,5-BTi11 | 47,5 | - | 3,5 | Carburo | M5 | 3,1 | - | 37,5 | 8,95 | |||
579.60 € | 1 | 60 giorni | 1,05 | 4 | Acciaio inossidabile | 01-M3-DC1,05-L21-ML4-SS0,7-BS4 | 21 | - | 0,7 | Acciaio inossidabile | M3 | 1,3 | - | 4 | 1,05 | |||
579.60 € | 1 | 60 giorni | 3,05 | 4 | Acciaio inossidabile | 01-M3-DC3,05-L21-ML14-SS1,5-BS4 | 21 | - | 1,5 | Acciaio inossidabile | M3 | 1,3 | - | 12 | 0,96 | |||
579.60 € | 1 | 60 giorni | 2,05 | - | Acciaio inossidabile | 01-M2-DC2,05-L40-ML32,5-SWC1,5-BS3 | 40 | - | 1,5 | Carburo | M2 | 1,3 | - | 32,5 | 1,26 | |||
579.60 € | 1 | 60 giorni | 3,05 | - | Acciaio inossidabile | 01-M2-DC3,05-L50-ML47,5-SWC2-BS3 | 50 | - | 2 | Carburo | M2 | 1,3 | - | 47,5 | 2,35 | |||
792.00 € | 1 | 60 giorni | 5,05 | 4 | Acciaio inossidabile | 01-M2-DC5,05-L31-ML31-SWC2-BS3 | 31 | - | 2 | Carburo | M3 | 1,3 | - | 31 | 2,01 | |||
690.00 € | 1 | 60 giorni | 1,05 | 4 | Acciaio inossidabile | 01-M3-DC1,05-L22-ML12-SWC0,8-BS4 | 22 | - | 0,8 | Carburo | M3 | 1,3 | - | 12 | 0,8 |
Loading...
Informazioni di base
| Product Type | Prodotti correlati alle apparecchiature per dati | Ball Grade DIN 5401 | Grado 5 | Ball Material | Diamond coated SiC |
|---|
Configura
Proprietà di base
-
Diametro sfera(mm)
-
Base Diametro(mm)
-
Materiale base
- Acciaio inossidabile
- Titanium
-
Description protocol system
- 01-M2-DC1,05-L10-ML6-SWC0,8-BS3
- 01-M2-DC1,05-L20-ML7-SWC0,7-BS3
- 01-M2-DC2,05-L20-ML15-SWC1-BS3
- 01-M2-DC2,05-L40-ML32,5-SWC1,5-BS3
- 01-M2-DC3,05-L20-ML17-SWC1,5-BS3
- 01-M2-DC3,05-L50-ML47,5-SWC2-BS3
- 01-M2-DC5,05-L31-ML31-SWC2-BS3
- 01-M2-DC5,05-L40-ML40-SWC2,5-BS3
- 01-M3-DC1,05-L10-ML5-SWC0,8-BS4
- 01-M3-DC1,05-L21-ML4-SS0,7-BS4
- 01-M3-DC1,05-L21,5-ML8,5/4,5-SWC1/0,8-BS4
- 01-M3-DC1,05-L22-ML12-SWC0,8-BS4
- 01-M3-DC2,05-L20-ML12,5-SWC1,5-BS4
- 01-M3-DC2,05-L30-ML22,5-SWC1,5-BS4
- 01-M3-DC3,05-L20-ML15,5SWC1,5-BS4
- 01-M3-DC3,05-L21-ML14-SS1,5-BS4
- 01-M3-DC3,05-L50-ML42,5-SWC2-BS4
- 01-M3-DC5,05-L40-ML40-SWC2-BS4
- 01-M3-DC5,05-L50-ML50-SWC2-BS4
- 01-M5-DC1,05-L22-ML13/4,7-SWC1/0,8-BTi11
- 01-M5-DC2,05-L32,5-ML23,5-SWC1,5-BTi11
- 01-M5-DC2,05-L43-ML18-SWC4/1,5-BTi11
- 01-M5-DC3,05-L32-ML22-SWC2-BTi11
- 01-M5-DC3,05-L48,5-ML38,5-SWC2-BTi11
- 01-M5-DC5,05-L47,5-ML37,5-SWC3,5-BTi11
-
Lunghezza(mm)
-
Qmark Code No.
- ATG-3033-DC
-
Gambo Diametro(mm)
-
Shaft stem material
- Acciaio inossidabile
- Carburo
-
Thread
-
Thread 2
- 1,3
- 3,1
-
100x Magnification Range / Interval(mm)
- 0,8
-
Dimensioni tavola(mm)
-
Tipo
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 60 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.