Connettori scheda-scheda（Direzione collegamento：Dritto）

?* Informazioni su tempi di consegna e prezzi

• • Raccomandazione

  

  Connettore DIN (4 file, 128 contatti) - XC5 (più contatti)

  OMRON

  [Features]
  ・ A multi-pin connector designed with DIN in mind, expanded to include a large number of contacts (4 rows, 128 contacts).
  ・ The aim is to move to a larger number of contacts while leveraging the best points of DIN connectors.
  ・ Two types are available for the plug L-shaped terminal: a standard DIN type and a circuit board mounted DIN style type.
  ・ In order to realize a low insertion force and maintain high reliability, the contact configuration adopts twin contacts.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	15.11 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • Raccomandazione

  

  Connettore DIN (per correnti medie e alte) - XC4

  OMRON

  [Features]
  ・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
  ・ It conforms to and is compatible with DIN41612.
  ・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
  ・ It can be mounted within the same rack as the XC5 series.
  ・ There is a wide selection of the M type of DIN connectors (mixed type) available.
  ▪ UL standard (File No.E103202) certified products are used as standard (except for some products).

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	21.09 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda‑scheda (passo 0.5mm, altezza 4—5mm) - Serie FX10

  HIROSE ELECTRONIC

  [Features]
  · Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
  Some in-stock items are custom products, therefore returns and cancellations are not possible.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.30 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-a-scheda con passo 2mm (terminale a 2 file) serie A3

  HIROSE ELECTRONIC

  2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.19 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Serie BLZF 3.5

  WEIDMUELLER

  [Features]
  ・3.50-mm pitch spring connection.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.86 €
  Consegna da ：	92 giorni

  *Prezzo unitario in configurazione base

• 

  Serie B2L 3.5

  WEIDMUELLER

  Connessione a molla a 2 strati con passo di 3,5 mm, possibilità di cablaggio e baying di piccole dimensioni.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	7.92 €
  Consegna da ：	51 giorni

  *Prezzo unitario in configurazione base

• 

  Serie SL 3.5

  WEIDMUELLER

  Connettore a passo 3,5 mm sul lato PCB. I connettori maschi sono disponibili nelle versioni aperta, chiusa (G) e flangiata (F).

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.78 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Serie FFC

  HONDA TSUSHIN KOGYO

  Connectors for 2.54 mm-pitch board-to-board connections, full product line-up
  
  [Features]
  • The FFC series includes highly reliable products with a long record of performance as headers for 2.54 mm-pitch boards. Can be used in a variety of applications.
  • Can be used, in combination with the HKP series, as board-to-board or board-to-cable connectors.
  • Can be used, in combination with the DIC series, as circuit-switching terminal plates.
  • Can select the number of contacts required.
  • Many pin lengths are available, so the user can select the appropriate length for a given.
  • Select the surface required: gold, tin, or copper.
  • Molds come in two colors (black and red).
  • Remover pin prevents backwards insertion.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.20 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Serie DIC

  HONDA TSUSHIN KOGYO

  2.54 mm pitch connector used for circuit switching and the like.
  
  [Features]
  • Many varieties available for combination with the FCC and HKP series.
  • Plating thickness is selectable according to cost requirements.
  • Insulator is UL-certified.
  • These connectors also come in 2, 3 and 4-series versions.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.20 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-scheda con passo 0.5mm, altezza 2—3mm, serie FX11

  HIROSE ELECTRONIC

  [Features]
  · A board-to-board connector with a ground plate.
  · Select with/without the ground plate and also the height of the board spacing (2–3 mm) to match the application.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.21 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda‑scheda con passo 0.5mm, altezza 4—8mm, serie DF17

  HIROSE ELECTRONIC

  Connector for board to board connection with 0.5-mm pitch. Select the distance 4mm to 8mm between circuit boards by combining header and receptacle.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	7.77 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda‑scheda con passo 0.6mm e altezza 3—4mm, serie FX8

  HIROSE ELECTRONIC

  The height between boards can be selected from 3 to 4 mm. Although it is compact, it has a guiding mechanism to improve operability. Can be used for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm can be applied.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm max.
  · Fit guiding.
  · Equipped with latching guiding ribs while being extremely small, the self-alignment tolerance of ±0.6 mm has been given much attention.
  · Prevents mis-insertion with circuit boards.
  · By placing circuit board positioning screws, mis-insertion to the circuit board is prevented based on the screw location and diameter.
  ・2-Piece Unit.
  ・With 2 fine-pitch connector units used for increased connection reliability, we offer a unique 2-connection method for each terminal as a new way to ensure highly accurate mounting (standard 11 mm connection pitch between the 2 arrays in the 2-piece unit).

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.91 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda‑scheda (passo 0.6mm, altezza 5—16mm) - Serie FX8C

  HIROSE ELECTRONIC

  The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm is applicable.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
  · Fit guiding.
  · Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
  · Protects against incorrect insertion into the circuit board.
  · Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
  · Two-part integrated product.
  · This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
  
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.85 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda‑scheda con passo 0.8mm e altezza 5—9mm, serie FX6

  HIROSE ELECTRONIC

  The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
  
  [Features]
  · Compatible with 5 mm to 9 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
  · Long effective mating length of 1.7 mm.
  · A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
  · Fit guiding.
  · A ±1 mm self alignment and large guiding volume makes for easy mating.
  · Supports automatic mounting.
  ·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.50 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda‑scheda con passo 1.27mm e altezza 5—11mm, serie FX4

  HIROSE ELECTRONIC

  Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
  
  [Features]
  ·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
  ●Dip Timer.
  1. Small and Lightweight.
  ・Mounting space and weight are the same as the prior products (FX2 series).
  ・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
  2. · Compatible with 5 mm to 11 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
  3. Prevention of flux oozing.
  · Prevents flux oozing during circuit board dip soldering.
  4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
  · The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.12 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a ingresso dal basso con passo 2.54mm, serie MDF7

  HIROSE ELECTRONIC

  With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
  
  [Features]
  ▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
  ▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
  ▪ Rich variation: single-array, double-array, and tin/gold plating available.
  ▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.51 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda‑scheda con passo 2.54mm: Serie HIF3H

  HIROSE ELECTRONIC

  This is a board-to-board interconnecting (stacking, vertical) connector with a 2.54mm pitch. This can be combined with other HIF3 series connectors.
  
  [Features]
  ・Product variations: It is possible to connect board-to-board either horizontally or at a right angle.
  ・Compatibility: It can be combined with other HIF3 series connectors.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.94 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-a-scheda con passo 2.54mm (terminale a 1 fila), serie A2

  HIROSE ELECTRONIC

  2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.28 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-a-scheda con passo 2.54mm (terminale a 2 file), serie A1

  HIROSE ELECTRONIC

  2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.40 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-a-scheda con passo 2mm (terminale a 1 fila), serie A4

  HIROSE ELECTRONIC

  2-mm pitch pin header terminal 1 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to DIP types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: Can be set when used with board-to-board, in combination with A3B pin header and a 6 mm distance between boards, or in combination with A3C pin header and a space of 5.1 mm between boards.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.24 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-cavo con blocco, passo 7.92mm, supporto alta corrente - Serie DF22【1-100 Pezzi per confezione】

  HIROSE ELECTRONIC

  [Features]
  · Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
  · Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.09 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-scheda conforme allo standard DIN serie PCN10

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.80 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-scheda conforme allo standard DIN serie PCN12

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.79 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori posteriori serie NX per schede I / O

  HIROSE ELECTRONIC

  These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
  
  [Features]
  • Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
  • Shell is metal: A metal shell was used for better shielding.
  • Structured so that the metal shell always touches before the contacts do.
  • Full ESD shielding: A cover over the mold provides full ESD shielding.
  • Locks securely: An inner lock makes locking more secure.
  • Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
  • Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	6.30 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore Micro-USB - Serie ZX

  HIROSE ELECTRONIC

  Micro-USB connector supporting the USB 2.0 standard. Hirose Electric Group is an industry leader in standardization, offering a wide array of products.
  Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.48 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-scheda conforme allo standard DIN, serie 128A

  FUJIKURA (DDK)

  [Features]
  · Three types (standard, reverse, and horizontal-mounting) available for use in a wide range of electronic equipment.
  · Can be used on IEC-standard 19-inch card frames.
  · A special socket contact shape provides self-cleaning and self-wiping effects, providing a stable connection.
  · Contact timings are staggered for each socket contact row, allowing contact with the GND terminal first before contacting the signal terminal.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.20 €
  Consegna da ：	13 giorni

  *Prezzo unitario in configurazione base

• 

  FFC-FPC (foro passante) (52045) tipo

  MOLEX

  [Features]
  There are a variety of Molex connectors available for both FFC (flat flexible cables) and FPC (flexible printed circuit boards). (1.0 mm pitch, NONZIF, straight type)

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.92 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  FFC-FPC (foro passante) (52806) tipo

  MOLEX

  [Features]
  • FFC (multi-conductor cable) and various connectors for FPC (flexible printed circuit boards) (1.0-mm pitch NONZIF straight type (2)).

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.58 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  FFC-FPC (foro passante) (5597) tipo

  MOLEX

  [Features]
  There are a variety of Molex connectors available for both FFC (flat flexible cables) and FPC (flexible printed circuit boards). (1.25mm pitch, ZIF, straight type)

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.98 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore DIN (contatto doppio) - XC5 (standard DIN)

  OMRON

  [Features]
  ・ The number of international standard DIN connectors has been expanded substantially.
  ・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
  ・These variations can be used with a number of industrial applications.
  ・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
  ・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
  ・ Low insertion force has been realized thanks to FEM analysis.
  ・ Can fit with the manufacturer's XC series.
  ▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.08 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore DIN (aderente, pin a W), XC5 (aderente)

  OMRON

  [Features]
  · International standard DIN solder-less connecting connector (popular name: press-fit) Series.
  · Compliant with DIN standards, these connectors make working with backplane systems easy.
  · A shape that ensures minimal hole-damage.
  · A highly reliable connection is possible thanks to the unique W-shape, which helps counter issues of twisting and sagging.
  · A shape that minimizes damage to PCB through holes.
  · The Omron type XC6 series can be used as a connector for backplane connections.
  · The socket utilizes a highly reliable dual contact (2-point contact) system.
  · A dedicated press-fitted jig is equipped as standard.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	34.13 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore DIN (contatto doppio) - XC5 (DIN)

  OMRON

  [Features]
  ・ An expanded DIN style connector series, designed with DIN in mind.
  ・ Fits with DIN standard connectors.
  ・ As it is a circuit board mounted type, it is ideal for automatic solder mounting.
  ・ DIN style 1 uses the same method of attachment as DIN.
  ・ DIN style 2 broadens the mounting dimensions further, allowing mounting with excess room.
  ・UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.
  (Except XC5).

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.94 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore HM (connettori Hard Metric, passo 2mm) - XC8 / XC9

  OMRON

  [Features]
  ・ PCI bus standard for use with industrial-use computers.
  ・ Compliant with Compact PCI compatible board-to-board 2.0-mm pitch IEC61076-4-101 connectors.
  ・ Supports 3U and 6U Euro Card packages.
  ・ The socket contact is a highly reliable double-sided contact type.
  ▪ UL standard (File No.E1032020) certified products are used as standard (except for some products).

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	21.86 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Zoccolo per circuiti integrati - XR2

  OMRON

  [Features]
  ・ Highly reliable such as being able to cope with sudden power outages etc.
  ・Ideal for high speed data processing circuits.
  · The contacts are round 4-point pin contacts which have good retention and superior vibration and shock resistance.
  ・ The opening for inserting the contact is large, so insertion is easy.
  ・ The position of the contact with the IC (integrated circuit) lead is high, ensuring an excellent contact.
  · Has excellent resistance to rises in flux.
  ・ A rich product lineup, including open frame, closed frame, single-row type, DIP terminal, wrapping (wrap) terminal, and low-profile DIP terminal types.
  ・ Gold flash-plated products are also now available as a series, allowing you to choose the perfect product for the application..
  ▪ UL standard (File No.E103202).
  ・ Certified products are used as standard.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.34 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore USB, XM7

  OMRON

  A compact interface connector that complies with USB standards
  
  [Features]
  · Mini-USB connector.
  · 5000 installation/removal cycles.
  · L-shaped DIP terminals and SMT terminals available.
  · USB connector.
  · The A type socket is for PCs and USB hubs, etc. The B type socket is for printers, scanners, mice and other PC peripherals.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.93 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Spina originale - XG8

  OMRON

  [Features]
  ・ This is a general purpose original plug that conforms to a broad range of applications.
  ・ It can be widely used as a plug for a variety of socket fitting.
  ・ Examples of conforming socket connectors (manufacturer: …, Connector for XG4M flat cable/XG5 loose wire insulation displacement connector.
  · Compatible with through hole diameter ⌀0.8.
  ・ For the 2-column type of L-shape terminal plug, through the utilization of a block type of base, workability is improved during soldering, a lock lever that has been simplified further is used and simple locking is possible (except for XG8V, XG8W Straight).
  ・ Separation cut is possible (except XG8WL type).
  ▪ UL standard (File No.E103202).
  ・ Certified products are used as standard (only XG8A and XG8B).

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.24 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a passo dimezzato (per collegamenti impilati a profilo basso) - XH4A

  OMRON

  [Features]
  ・A half-pitch connector with same shaped pins (male) and sockets (female) for stacking connections. Handles heights between circuit boards of 5 mm to 11 mm.
  ・ A half-pitch connector for low profile stacking connections. Handles heights between circuit boards of 5 mm to 11 mm at a pitch of 1 mm (surface mounting types handle heights of 5 mm to 9 mm at a pitch of 1 mm).
  ・ A selection of DIP and surface mounting type (SMT) are available.
  ・ A connector with same shaped pins (male) and sockets (female).
  ・ Standardized stop pins for all contacts to prevent floating and falling during soldering.
  ・ A leaf contact structure that can cope with prying.
  ▪ A UL standard certified product (File No.E103202) (except for SMT type).
  ・Cannot be mated with XH2/XH3 half pitch connector.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	7.56 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a passo dimezzato (per collegamenti scheda-scheda) - XH2

  OMRON

  A 1.27-mm pitch connector for high-density mounting and compacted electronic devices
  
  [Features]
  · Available in the same shape as the G5D in both AC/DC or DC-only types.
  · Open-state leakage current between outputs is 10 μA or less.
  · The voltage resistance between input/output is 2500 VAC.
  · Input resistance and non-input resistance types available.
  · Overvoltage absorption circuit built in.
  ▪ Can switch between AC full-wave rectification and half-wave rectification.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.52 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a passo dimezzato (per collegamenti scheda-scheda) - XH3

  OMRON

  [Features]
  ・ A space saving type that saves space in the screw mounting section.
  ・ Handles stacking heights of 12 mm to 20 mm.
  ・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
  ・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
  ・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
  ・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
  ・ Has a mating length of 3.1 mm, helping improve space during mounting.
  ・ The design of the press fit section helps maintain a stable contact force.
  ・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
  ▪ UL standard certified product (File No.E103202).
  ・Cannot be mated with XH2/XH4 half pitch connectors.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.08 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per cavo piatto (PCB), XG2

  OMRON

  [Features]
  · Total cost reduction is achieved by high-density mounting and low-power wire connections.
  · The pressure-welded system lets you connect all terminals in bulk without any terminal processing work.
  · Can be dip-soldered directly to a PCB.
  · The small size (height 5.8 mm, width 6.8 mm) greatly improves PCB mounting efficiency.
  · Uses a 2.54 mm grid terminal array.
  · PCB pattern design is easy.
  · Two types of terminal arrays: standard and inverse.
  · Uses insulating materials complying with UL standards (UL94V-0).
  · Pressure-welding tool uses attachment that supports all poles.
  · Saves time and work connecting wires.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.40 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per cavo piatto (per usi generici) - XG4

  OMRON

  The core of this printed circuit board connector is compliant with MIL standards.
  
  [Features]
  · The adoption of a new high-productivity design has delivered both high reliability and low costs.
  · A box type plug (XG4C type) that helps save space during installation is also available.
  · A press-fit type plug (XG4E type) that can be used as a relay is also available.
  · A wide range of installation options are available by combining discrete wire press-fitted/crimped connectors (XG5 type), original plugs (XG8 type), and PCB types (XG2 type).
  · The use of the simple and unique locking levers developed by the manufacturer makes it possible to lock original plugs (XG8 type) and box type plugs (XG4C type).
  · Complies with MIL standards (MIL-C-83503).
  · UL standard (File No.E103202) certified products are used as standard (except for the XG4U and XG4H models).

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.70 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori di corto - XJ8 / XG8S / XG8T

  OMRON

  [Features]
  · A low-profile, economical connector that is used for circuit switching.
  · Provides an above circuit board height of 5.8 mm (XJ8 type) or 6.8 mm (XG8S/T), and a low profile.
  · These connectors can also be used both vertically and horizontally in 2.54-mm grid high-density mountings.
  · Available in a lineup of one to three rows.
  · Compatible with through hole diameters of ⌀0.8.
  · An easy-to-insert, difficult-to-remove structure.
  · A 2-point contact structure with high contact reliability.
  · The thin plug housing (XJ8 type) is made using PPS resin, which has excellent heat-resistant characteristics.
  · UL Standard (File NO E103202).
  · Certified products are used as standard (XJ8 type).

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.16 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-cavo EnerBee con blocco serie DF33C【1-100 Pezzi per confezione】

  HIROSE ELECTRONIC

  Maximum 5 A. 3.3mm pitch. Satisfies the criteria of the Electrical Appliances and Material Safety Act: Creepage distance: 1.5 mm (resin filling) Widely used as a compact internal power supply connector.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.16 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori / Connettore per alimentazione interna, serie DF60 (supporto 45 A, passo 10,16 mm)

  HIROSE ELECTRONIC

  Maximum 45A. 10.16-mm pitch. This high power connector for large currents is the smallest size in its class.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.00 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore / terminale per alimentazione interna, serie DF63 (supporto 15 A, passo 3,96 mm)【100 Pezzi per confezione】

  HIROSE ELECTRONIC

  Maximum 15A. 3.96mm pitch. This connector employs a center lock function which enables high-density mounting, contributing to space saving on the board.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	12.95 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

Loading...