Connettori in nylon（Standard rappresentativo：UL）

?* Informazioni su tempi di consegna e prezzi

• • In Offerta fino al 31/12/2024
  • Raccomandazione

  

  Serie D3000

  TE CONNECTIVITY

  
  The D-3000 series, compatible with a wide range of dynamic main series sizes.
  
  [Features]
  · Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
  · Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
  · Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
  · High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
  · Newly developed copper alloy material realized with a reliable 3-point contact construction.
  · Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
  · Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.38 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore diritto Mini-Fit Jr.™ (5566)

  MOLEX

  Molex connectors for wire-to-wire and board-to-board are available in both single row and double row types. Power connector for a maximum rated current of 13.0 A. Straight type. (Mating housing: 5557)

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.30 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore spina serie X-COM-SYSTEM e 769

  WAGO

  The X-COM connector is a product for connecting between connector plugs and connector heads and terminal blocks. It enables connection between primary side terminal blocks and secondary side connectors, etc.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.87 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/11/2024

  

  Connettore Universal Mate-N-Lok

  TE CONNECTIVITY

  Universal Mate-N-Lok conforms to UL and CSA standards.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.34 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore OK per cablaggio a inserimento rapido.

  OHM ELECTRIC

  Nothing required for crimping; simply insert the copper wire to complete the connection.
  
  [Features]
  ・Nothing required for crimping.
  ・Simply insert the copper wire to complete the connection.
  ・Wires can be removed and the connection can be changed easily.
  ・Stable connection without individual discrepancies.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.26 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Connettori EL【10-100 Pezzi per confezione】

  JST (JST Manufacturing)

  A small connector designed for smoother mating, even when prying open the contact housing.
  
  [Features]
  · A small connector with easy contact housing insertion.
  · Ideal for pry insertion when mating.
  · Arm lock mechanism with exceptional durability.
  · Contact for 2 wire crimping.
  · Compatible with an ML connector.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.61 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Alloggiamento connettore filo-filo con passo 2.5mm (51112)

  MOLEX

  [Features]
  · A Molex wire-to-wire connector.
  · Retainer supporting types are also available (compatible housing: 51111, compatible terminal: 50398).
  · Number of electrodes: 2–15.
  · With panel mount ears: 51112**30.
  · Without panel mount ears: 51112**10.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.20 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Serie D5000

  TE CONNECTIVITY

  A D-5000 Series connector for use with equipment main power supply lines.
  
  [Features]
  · High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
  · By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
  · The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
  · The contacts can be selected to match the application.
  · Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
  · The long tab was developed for sequential coupling of tab contacts.
  · By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
  · High current tines (lead): This type of tine (lead) mounts to a circuit board.
  · A newly developed twin lead type.
  · This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
  · IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
  · By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.14 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/11/2024

  

  Connettore XA (per collegamenti relè)【1-10 Pezzi per confezione】

  JST (JST Manufacturing)

  A connector with 2.5-mm pitch and strong lock for combined use with relays and circuit boards.
  
  [Features]
  ・A 2.5-mm pitch relay connector compatible with preexisting XA sockets.
  ・In addition to being compatible with an extremely reliable retainer, this product can also be attached to panels.
  ・ Corresponds to preexisting XA sockets.
  ・Inner type contact lance.
  ・Compatible with Panel Mount.
  · A retainer.
  ・Strong Lock Mechanism.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.26 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Alloggiamento connettore filo-filo con passo 2.5mm (51111)

  MOLEX

  Molex wire-to-wire connector. Retainer type is also available. (Mating housing: 51112, conforming terminal: 50397)

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.11 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a molla, serie 231, passo 5 mm, maschio

  WAGO

  The female side can be connected to 231-100 series connectors with the male side of a spring type connector. The corresponding circuit board can be connected to 232-100/200 series connectors.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.72 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a molla, serie 231, passo 5 mm, femmina

  WAGO

  Male side can be connected to 231-600 series connectors with the female side of a spring-type connector. Corresponding circuit board can be connected to 231-100/400 series connectors.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.59 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore Easy Lock serie 110【500 Pezzi per confezione】

  NICHIFU TERMINAL INDUSTRIES

  A newly developed lock mechanism inside the connector enables the connector to be gently and securely installed in tab terminals. (110 Series)
  
  [Features]
  · Uses a newly developed locking mechanism.
  · Enables a reliable and highly safe connection by the motion of a locking mechanism where part of the terminal is a spring, thus preventing loss of connection caused by vibration or pulling out the electrical line.
  · Soft-touch.
  · Gentle and smooth mounting on tab terminals, dramatically reducing burden on workers and greatly improving workability.
  · Also easy to remove.
  · The connector can be easily pulled out by sliding the housing to release the lock mechanism.
  · Soft-touch allows worker burden to be reduced in the same way as for mounting the connector.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	81.22 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore filo tipo spina【50 Pezzi per confezione】

  NICHIFU TERMINAL INDUSTRIES

  Pluggable wire connector for indoor wiring. Has a highly reliable, 2-point contact spring structure. The transparent cover enables the wires to be visually checked.
  
  [Features]
  · A highly safe, soft-touch product that utilizes an easy-lock connector mechanism.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	17.41 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Serie D1000

  TE CONNECTIVITY

  The D-1000 Series are the smallest connectors within the Dynamic Series range.
  
  [Features]
  [Supports a wide range of wires]
  · This connector offers an extensive range of wiring, and supports 30–18 AWG. The outer diameter of the wire coating is large at ⌀ 2.2 mm (when using the D-1200/D-1500 Series), which can also be used as standard on-board.
  [Crimp tool with interchangeable dies]
  · The die on this standard tool is interchangeable. This a single-handle system gives the die purchase for each range, which makes it possible to reduce lead time and minimize implementation costs.
  [A full Series lineup]
  · The 2.0-mm pitch D-1100 and 2.5-mm pitch D-1200 Series are available for selection depending on the wire sizes and the voltages that are used. The lineup includes a number of electrodes up to a maximum of 40 P.
  · The D-1500 Series lineup features 3.5-mm pitch products that are optimally suited for applications, such as bundling signal wires and branching power supplies.
  · The Series lineup includes different color versions in addition to the previous standard black color.
  · In addition to positively promoting the use of multiple electrodes of the same number, it also contributes to a reducing the amount of time required to assemble connectors.
  · The lineup includes more affordable tin plated products, as part of the terminal plating specifications, in addition to conventional products with standard gold plating.
  · Contact options support an extensive range of uses based on application, quality, and cost considerations.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.44 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 30/11/2024

  

  Serie BLC 5.08mm

  WEIDMUELLER

  Serie BLC, passo 5,08 mm, connettore a bicchiere con sistema di connessione a crimpare.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.77 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore Mini Universal Mate-N-Lok【1-20 Pezzi per confezione】

  TE CONNECTIVITY

  Small connector that facilitates high density wiring inside equipment.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.56 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore EH【50-100 Pezzi per confezione】

  JST (JST Manufacturing)

  This connector has an ultra-thin design, in response to customers' needs for high-density mounting and increased freedom in circuit design of electronic equipment.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.25 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Alloggiamento per sistema di interconnessione KK® (5051)

  MOLEX

  [Features]
  An ever-popular Molex connector for wire-to-circuit board connections. Housing (Mating wafers: 5045/5046, conforming terminal: 5159)

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.09 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore Micro-Fit 3.0 (43045)

  MOLEX

  [Features]
  · Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins.
  · Maximum rated current: 5.0 A. Brand name compatible products are also available. A header for boards (compatible housing: 43025).
  [Specifications changed in June 2015. Gloss plating ⇒ non-gloss plating. This eliminates the terminal gloss. There are no changes in the specifications.]

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.90 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore PCB con passo 2,00 mm Micro-Latch™ (50165)

  MOLEX

  The head of the Molex receptacle housing uses a friction lock for sliding into the opening. Delivers excellent circuit protection and durability against constant inserting and extracting. (Compatible terminal: 50212, mating wafers: 53253 / 53254)

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.06 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore angolare Mini-Fit Jr.™ (5569)

  MOLEX

  Molex connectors for wire-to-wire and board-to-board are available in both single row and double row types. A power connector for a maximum rated current of 13.0 A. Angled type. (Mating housing: 5557)

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.72 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Alloggiamento MX150 (19433)

  MOLEX

  [Features]
  Molex Fitting Housing: 19432, Compatible Terminal: 19431

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	13.01 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Alloggiamento modulare SL™ (70066)

  MOLEX

  Molex 2.54-mm pitch wire-to-wire and wire-to-board connector, available in a range of options suitable for discrete wires, IDT and FFC cables. 1

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.23 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Alloggiamento spina standard da 093" (1360)

  MOLEX

  A 5.03 mm pitch nylon power connector.
  [Features]
  · Standard connector system based on ø0.093 inch diameter pins.
  The terminals are usable with either crimp housings or receptacles.
  Supports up to 14.0 A (9.0 A at maximum circuit size, and 17.0 A when using high-current / low force terminals).
  The largest wire-to-wire, wire-to-board configurations support up to 15 pins.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.59 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore Micro-Fit 3.0 (43645)

  MOLEX

  [Features]
  · Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins. Maximum rated current: 5.0 A. Brand name compatible products are also available. (Compatible housing: 43640)

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.06 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a molla, serie 733, passo 2.5mm, femmina

  WAGO

  The male side can be connected to 733-200 series connectors with the female side of the mini type spring connector. The corresponding circuit board can be connected to 733-300 series connectors. Maximum wire size is 0.5 mm2.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.68 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Connettore a molla, serie 734, passo 3.5mm, femmina

  WAGO

  Male side can be connected to 734-300 with the female side of a spring type connector, and the corresponding circuit board can be connected to 734-100 and 400 series connectors. The connector is ideal for sensor wires since it is very compact.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.68 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Connettore a molla, serie 734, passo 3.81mm, femmina - Connettore compatto

  WAGO

  The male side can be connected to 734-300 series connector with the female side of a spring type connector, and the corresponding circuit board can be connected to 3.81 mm pitch 734-200 series/400 series connectors. It is a very compact connector.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.68 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Connettore a molla, serie 734, passo 3.5mm, maschio

  WAGO

  The female side can be connected to 734-100 series connectors along with the male side of the mini type spring connector. MAX wire size is 1.5 mm2

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.65 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Connettore a molla, serie 734, passo 3.5mm, maschio con flangia di fissaggio a vite

  WAGO

  Female side can be connected to 734-100 series connectors with the male side of a mini spring-type connector. MAX wire size is 1.5 sq.mm.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.05 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Serie D4000

  TE CONNECTIVITY

  The D4000 series is optimal for 20A commercial power supply line use.
  
  [Features]
  • Small high current contact point: By increasing the number of contact areas, this newly designed contact point ensures Hertzian stress is divided among 4 contact positions.
  • This not only provides current capacity (rated for 20A maximum), but also increases reliability tremendously.
  • Sequential contact: When circuits are electrified through static electricity or other currents, this product can be used to perform mating via a sequential process, initially by grounding the mating site.
  • Long tab was developed for sequential connection use with tab contacts.
  • By using this long tab in combination with a normal tab contact, a sequential connection environment architecture can be created.
  • High current tine (lead): This type of tine (lead) mounts to a circuit board, and is a newly developed folding V-shaped tine.
  • Although the joining area with the circuit board is wide, the through hole is extremely small, and this allows for easy pattern routing (patent pending).
  • Lock feeling: The clear locking sound and vibration that are apparent to the operator during mating ensure that work can be completed even in environments where visual inspection is not possible, without producing any malfunctions such as incomplete mating (partial mating).
  • Keying: The housing has a keying (slit) installed, and by using X keys and Y keys for different purposes, improper mating can be prevented.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.03 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Serie D2000

  TE CONNECTIVITY

  The D-2000 Series remains small while satisfying specifications for industrial equipment.
  
  [Features]
  Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
  Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
  Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
  · Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
  · Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
  · Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
  · Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
  · Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.57 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Serie BL 3.50

  WEIDMUELLER

  Attacco a vite con passo di 3,5 mm. Articoli standard. [numero di articoli]7/10

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.43 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore Commercial Mate-N-Lok

  TE CONNECTIVITY

  Small, lightweight connector that can increase precision of equipment.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.30 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Modulo HTS Dynamic

  TE CONNECTIVITY

  [Features]
  · The Dynamic Series of connectors have been developed heavy duty waterproofing applications.
  · All Dynamic Series connectors are mountable from the inside of control panels to the panel exterior.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.04 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori MATE-N-LOK per correnti elevate

  TE CONNECTIVITY

  These connectors are designed for high-current applications such as in refrigerators, freezers, air-conditioners, and microwave ovens.
  
  [Features]
  • These connectors are designed for high-current applications such as in refrigerators, freezers, air-conditioners, and microwave ovens.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.21 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Serie ML-7000

  SATO PARTS

  A button-lock relay type, screwless terminal block convenient for relay wiring inside narrow ducts, etc. This a single-action coupling type and comes in 8 different colors.
  
  [Features]
  · Compatible with both bundled and single cords.
  · Connections can be made using the irregular surface of the main body.
  · 8 standard button colors are available for easy line discernment.
  · A single main unit is compatible with a wide range of wire materials and uses.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.16 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettori CL【1-500 Pezzi per confezione】

  JST (JST Manufacturing)

  These are connectors that allow branching and short-circuit low resistance connections using simple tools such as pliers.
  
  [Features]
  ・ Insulation displacement connection is possible by simple operation.
  ・There is no need to strip the electrical wire sheathing when connecting.
  ・ No special tool is required. The internal contact (fork-shaped contact) is securely pressed against the electrical wire. The connection can be completed by simply clamping the connector body using pliers, etc.
  ・Superior insulation performance.
  ・Insulating the connecting section is not required.
  ・The pre-installed housing provides highly reliable insulating effectiveness.
  ・Mechanism for temporarily securing electrical wires.
  ・Includes a built-in mechanism for temporarily securing electrical wires to prevent wire-slip or connection errors when connecting wires.
  ・ Workability has been improved.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.95 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore HL (per collegamenti relè)【1-6,000 Pezzi per confezione】

  JST (JST Manufacturing)

  Utilizing free spring contact structure, this connector is designed with a retainer, inner lock, and other safety features.
  
  [Features]
  · A connector with 3.96-mm pitch that utilizes free spring contact structure.
  · Besides the excellent reliability offered by the unique stress-relaxation ability, a retainer, inner lock, and other safety features are also designed into the product.
  · Utilizing a free spring contact structure.
  · Housing lance method.
  ▪ Interlock structure.
  · A retainer.
  · Panel lock structure.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.49 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore NH【50 Pezzi per confezione】

  JST (JST Manufacturing)

  The post with base has three types: top, side and bottom. Electrical entry is possible in three directions: at right angles to the board (up or down) or parallel to the board.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.21 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore PH【1-1,000 Pezzi per confezione】

  JST (JST Manufacturing)

  This slim, low profile connector has been designed in response to requirements for higher density internal wiring.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.49 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Connettori SM【1-1,000 Pezzi per confezione】

  JST (JST Manufacturing)

  This small-type relay connector is equipped with a panel lock mechanism, and offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  
  [Features]
  ・This small-type relay connector with 2.5-mm pitch offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  ・High contact pressure, dual contact.
  · Shell type housing.
  ・Applicable to a wide range of panels.
  ▪ Arm lock mechanism.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.11 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore VH【50 Pezzi per confezione】

  JST (JST Manufacturing)

  This is a highly reliable small high-capacity connector for printed circuit boards, which enables a wide range of connections from signal circuits in consumer electronics, to power supply circuits and output circuits.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.73 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore XA (per PCB)【1-250 Pezzi per confezione】

  JST (JST Manufacturing)

  This connector has a strong locking mechanism to prevent the housing from coming off, and to prevent mis-insertion when mating.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	0.86 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

Loading...