GANTER Pistoncini
Limitare la ricerca specificando Tipo
-
Manopola standard -
Con leva -
Con anello -
Componenti annessi -
Senza manopola -
Manopole speciali
?* Informazioni su tempi di consegna e prezzi
-
- In Offerta
Indexing plungers with T-Handle
GANTER
Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 9.50 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Mini indexing plungers, with and without rest position
GANTER
Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.
The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.
In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 14.38 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel / Plastic knob
GANTER
Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 13.00 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Mini indexing plungers, open indexing mechanism, with red knob
GANTER
Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 5.40 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
Stantuffo in acciaio inossidabile, design igienico laterale del perno della manopola (full hygie
GANTER
- Sconto volumi elevati
A partire da∗ ： 111.60 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
A partire da∗ ： 16.66 € Consegna da ： 12 giorni *Prezzo unitario in configurazione base
-
A partire da∗ ： 12.72 € Consegna da ： 12 giorni *Prezzo unitario in configurazione base
-
A partire da∗ ： 26.48 € Consegna da ： 12 giorni *Prezzo unitario in configurazione base
-
Cam action indexing plunger, Plunger pin retracted
GANTER
Cam action indexing plungers GN 712.1 are used in such applications where the plunger pin has to protrude only occasionally. When turning the cam by 90° resp. 120° degrees in clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is protruded.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in protruded position (Type R), resp. is secured against accidental operation (Type S). In order to move the plunger pin, safety version Type S requires an additional pushing of the latch.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 25.62 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Cam action indexing plungers for welding
GANTER
Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 20.90 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Cam action indexing plungers with flange
GANTER
Cam action indexing plungers GN 612.10 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 10.12 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Cam action indexing plungers with flange
GANTER
Cam action indexing plungers GN 612.9 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 9.42 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Cam action indexing plungers, flange for surface mounting
GANTER
Cam action indexing plungers GN 612.2 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 32.48 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Cam action indexing plungers, Plunger pin protruded
GANTER
Cam action indexing plungers GN 712 are used in such applications where the plunger pin must not protrude continually. When turning the cam by 90° resp.120° degrees in anti-clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is retracted.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in retracted position (Type R), resp. is secured against accidental operation (Type S).
In order to move the plunger pin, safety version Type S requires an additional lifting of the latch.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 24.32 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Cam action indexing plungers, Stainless Steel
GANTER
Stainless Steel-Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 17.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Cam action indexing plungers, Steel
GANTER
Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 14.22 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Cam action indexing plungers, Steel, with locking function
GANTER
The groove on GN 721.1 cam action indexing plungers ensures that the locking pin remains in its withdrawn position.
For opposing cam action indexing plungers the left or right-handed types allow practical use, that is the same setting of the lock.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 18.28 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Cam action indexing plungers, Steel, without locking function
GANTER
For GN 721 cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 18.30 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Cam action indexing plungers, Zinc die casting
GANTER
Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The notch allows safe positioning.
These cam action indexing plungers made of die-cast zinc are very reasonably priced design versions.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 7.80 € Consegna da ： 3 giorni *Prezzo unitario in configurazione base
-
Clamping indexing plungers with safety function
GANTER
Clamping indexing GN 7336.8 plungers are an advanced development of the GN 7336.7 clamping knobs with indexing plunger.
Like the latter, they are used for positioning, securing and clamping adjusting elements at the same time. This configuration ensures that the indexing pin cannot be pulled from the indexing bore by turning the knurled knob, but only be deliberately pulling the handle (safety function).- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 26.18 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Clamping knobs with indexing plunger
GANTER
Clamping knobs with indexing plunger GN 7336.7 are used for positioning, securing and clamping adjusting elements at the same time.
The axial movement of the handle (pulling) pulls the indexing pin from the engaged position against the spring force, with the star know at the same time remaining connected with form-lock to the clamping screw via a hexagonal element, allowing both clamping and releasing.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 8.56 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
A partire da∗ ： 3.16 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plunger, Steel / Plastic knob
GANTER
Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 8.86 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Indexing plungers for precision locating
GANTER
Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushes DIN 179 are used.
For this purpose a guide bush DIN 179 is used as guide, whereby the dimension l3 of the plunger determines the length of the bush.
The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 27.02 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers for thin walled equipment
GANTER
Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 17.36 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Indexing plungers for welding, with rest position
GANTER
Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°.
A notch keeps the plunger in this position.
The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 15.66 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers for welding, without rest position
GANTER
Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 14.96 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Indexing plungers with red knob
GANTER
Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 10.42 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Indexing plungers with rest position, for thin walled equipment
GANTER
Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.
Indexing plungers with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 20.32 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Indexing plungers with rest position, Plunger Steel
GANTER
Indexing plungers GN 608.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 608.1 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 9.12 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers with rest position, Stainless Steel / Plastic knob
GANTER
Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 14.98 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Indexing plungers with rest position, Steel / Plastic knob
GANTER
Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 10.48 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers without thread, Steel / Plastic knob
GANTER
Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 8.66 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, plunger conical
GANTER
Indexing plungers GN 817.5 allow highly accurate positioning, with the guidance made by the positioning bushings DIN 172 / DIN 179 with cylindrical bore. The actual indexing bore is fitted with positioning bushings GN 172.1 / GN 179.1 with conical bores.
The conical shape of the indexing pin / the indexing bore makes the positioning virtually clearance-free and therefore highly precise.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 35.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Plunger Stainless Steel
GANTER
Stainless Steel-Indexing plungers GN 608.5 are distinguished for their small dimensions.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 11.56 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Plunger Steel
GANTER
Indexing plungers GN 608 are distinguished for their small dimensions.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 8.62 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, removable
GANTER
Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 12.46 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Indexing plungers, removable
GANTER
Indexing plungers GN 817.9 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 14.82 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Indexing plungers, Stainless Steel / plastic knob
GANTER
Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 11.28 € Consegna da ： 3 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 23.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 15.32 € Consegna da ： 3 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel, with knob, with and without rest position
GANTER
GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 5.52 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Steel
GANTER
GN 7017 indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 6.42 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Steel / long Plastic-knob
GANTER
Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 9.70 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Indexing plungers, Steel / plastic knob
GANTER
Type G or GK of the GN 613 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 7.60 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da ： |
| Tipo |
| Meccanismo di blocco |
| Metodo di montaggio |
| Lunghezza complessiva |
| Materiale corpo |
| Tutto in acciaio inox |
| Materiale punta |
| Diametro esterno M(mm) |
| Corsa S(mm) |
| Trattamento superficie punta |
| Trattamento termico punta |
| D.E. punta d(Ø) |
| Lunghezza L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Serie prodotto | Stainless Steel-Mini indexing plungers, with and without rest position | Mini indexing plungers, open indexing mechanism, with red knob | Stantuffo in acciaio inossidabile, design igienico laterale del perno della manopola (full hygie | Cam action indexing plungers, Steel, without locking function | Indexing plungers with rest position, for thin walled equipment | Indexing plungers with rest position, Stainless Steel / Plastic knob | Indexing plungers, Stainless Steel, with knob, with and without rest position | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| A partire da∗ | 9.50 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 14.38 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 13.00 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 5.40 € *Prezzo unitario in configurazione base Sconto volumi elevati | 111.60 € *Prezzo unitario in configurazione base Sconto volumi elevati | 16.66 € *Prezzo unitario in configurazione base Sconto volumi elevati | 12.72 € *Prezzo unitario in configurazione base Sconto volumi elevati | 26.48 € *Prezzo unitario in configurazione base Sconto volumi elevati | 25.62 € *Prezzo unitario in configurazione base Sconto volumi elevati | 20.90 € *Prezzo unitario in configurazione base Sconto volumi elevati | 10.12 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 9.42 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 32.48 € *Prezzo unitario in configurazione base Sconto volumi elevati | 24.32 € *Prezzo unitario in configurazione base Sconto volumi elevati | 17.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 14.22 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 18.28 € *Prezzo unitario in configurazione base Sconto volumi elevati | 18.30 € *Prezzo unitario in configurazione base Sconto volumi elevati | 7.80 € *Prezzo unitario in configurazione base Sconto volumi elevati | 26.18 € *Prezzo unitario in configurazione base Sconto volumi elevati | 8.56 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 3.16 € *Prezzo unitario in configurazione base Sconto volumi elevati | 8.86 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 27.02 € *Prezzo unitario in configurazione base Sconto volumi elevati | 17.36 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 15.66 € *Prezzo unitario in configurazione base Sconto volumi elevati | 14.96 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 10.42 € *Prezzo unitario in configurazione base Sconto volumi elevati | 20.32 € *Prezzo unitario in configurazione base Sconto volumi elevati | 9.12 € *Prezzo unitario in configurazione base Sconto volumi elevati | 14.98 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 10.48 € *Prezzo unitario in configurazione base Sconto volumi elevati | 8.66 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 35.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 11.56 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 8.62 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 12.46 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 14.82 € *Prezzo unitario in configurazione base Sconto volumi elevati | 11.28 € *Prezzo unitario in configurazione base Sconto volumi elevati | 23.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 15.32 € *Prezzo unitario in configurazione base Sconto volumi elevati | 5.52 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 6.42 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 9.70 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 7.60 € *Prezzo unitario in configurazione base Sconto volumi elevati |
| Consegna da ： | Stesso giorno | Stesso giorno | Stesso giorno | 4 giorni | 7 giorni | 12 giorni | 12 giorni | 12 giorni | 7 giorni | 7 giorni | Stesso giorno | Stesso giorno | 7 giorni | 7 giorni | Stesso giorno | Stesso giorno | 7 giorni | 7 giorni | 3 giorni | 7 giorni | Stesso giorno | 7 giorni | Stesso giorno | 4 giorni | Stesso giorno | 7 giorni | Stesso giorno | 7 giorni | 7 giorni | 4 giorni | Stesso giorno | 4 giorni | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 7 giorni | 3 giorni | Stesso giorno | 3 giorni | Stesso giorno | Stesso giorno | Stesso giorno | 7 giorni |
| Tipo | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Meccanismo di blocco | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Metodo di montaggio | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lunghezza complessiva | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Materiale corpo | - | - | Acciaio inox | Acciaio / Acciaio inox | - | - | - | - | - | - | - | - | - | - | Acciaio inox | - | - | - | - | - | - | - | - | - | Acciaio | Acciaio | Acciaio | - | Acciaio | - | Acciaio inox | - | - | - | - | - | Acciaio | - | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio | - | - |
| Tutto in acciaio inox | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Materiale punta | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Diametro esterno M(mm) | - | - | - | - | - | - | - | - | - | - | 16 ～ 20 | 16 ～ 20 | 16 ～ 20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Corsa S(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Trattamento superficie punta | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Trattamento termico punta | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. punta d(Ø) | 6 ～ 12 | 4 ～ 10 | 5 ～ 10 | 4 ～ 7 | - | - | - | - | 6 ～ 8 | - | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 10 | 4 ～ 12 | 4 ～ 12 | 5 ～ 10 | 5 ～ 10 | 4 ～ 12 | - | - | - | 5 ～ 10 | 6 ～ 10 | 6 ～ 8 | 6 ～ 8 | 6 ～ 8 | 6 ～ 10 | 6 ～ 8 | 6 ～ 8 | 5 ～ 10 | 5 ～ 10 | 5 ～ 8 | 6 ～ 10 | 6 ～ 8 | 6 ～ 8 | 7 ～ 12 | 7 ～ 10 | 5 ～ 10 | 6 ～ 8 | 6 ～ 8 | 3 ～ 10 | 4 ～ 10 | 4 ～ 12 | 5 ～ 10 |
| Lunghezza L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Seleziona per:
Stock
-
- Stock Items Included
Limitare la ricerca specificando Spec./Dim.
-
Meccanismo di blocco
-
Non fornito
-
Blocco puntale
-
Ritorno
-
Non fornito
-
Metodo di montaggio
- Attacco a vite
- Accoppiamento con interferenza
- Montaggio bullone
- Altro
- Flangia
-
Lunghezza complessiva
- Standard
- Tipo corto
-
Materiale corpo
- Acciaio
- Acciaio inox
- Zinco pressofuso
- Altro
-
Tutto in acciaio inox
- Applicabile
- non Conforme
-
Materiale punta
- Acciaio
- Acciaio inox
-
Diametro esterno M(mm)
-
Corsa S(mm)
-
Trattamento superficie punta
-
Trattamento termico punta
-
D.E. punta d(Ø)
-
Lunghezza L(mm)
Limitare la ricerca specificando il produttore
-
- MISUMI (19)
- NORELEM (183)
- KIPP (142)
- GANTER (88)
- HALDER (37)
- NABEYA BI-TECH (24)
- KONISHI MFG (19)
- ELESA (4)
- NABEYA (1)
- TOSHIN CASTER (1)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Limitare la ricerca specificando Tempi di consegna
-
- Tutti gli articoli
- Stesso giorno
- 2 giorni o meno
- 3 giorni o meno
- 4 giorni o meno
- 5 giorni o meno
- 6 giorni o meno
- 7 giorni o meno
- 8 giorni o meno
- 9 giorni o meno
- 11 giorni o meno
Categorie collegate a Pistoncini
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.