KANAFLEX CORPORATION Flessibili per condotti（Colore：Grigio）
?* Informazioni su tempi di consegna e prezzi
-
Tubo del condotto Condotto N.S.D.
KANAFLEX CORPORATION
The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
[Features]
· The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
· Easy to carry to increase work efficiency.
· The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
· In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
· The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.Consegna da ： 10 giorni -
Condotto per tubo flessibile Condotto duro N.S.
KANAFLEX CORPORATION
[Features]
· PVC Product.
· Excellent heat resistance.
· Structure has less bends due to temperature change.
· Flexible bendable hose.
· At least 10% lighter than existing hard ducts.
· Up to 50% elastic so as not to damage the airtightness.
· Aperture will change just by twisting the opening of the duct.
· Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
· Cutting and mounting are easy and piping work can be performed easily.Consegna da ： 56 giorni -
Tubo del condotto Modello D
KANAFLEX CORPORATION
[Features]
· A general-purpose duct hose with abundant applications and excellent quality and reliability.
· Easy cutting and mounting facilitates easy piping.Consegna da ： 16 giorni -
Tubo del condotto Modello EE
KANAFLEX CORPORATION
[Features]
▪ Low internal resistance and high transportability.
· Easy to bend, lightweight, and work-efficient.
· Easy cutting and mounting facilitates easy piping.Consegna da ： 9 giorni -
Tubo del Condotto resistente agli oli
KANAFLEX CORPORATION
Has little internal resistance, therefore allowing for substantial transport capacity. Made from special oil-resistant vinyl chloride for excellent resistance to lubricating oil, cutting oil, and other oils. Cutting and mounting are easy and piping work can be performed easily.Consegna da ： 16 giorni -
Tubo del condotto Condotto in Metallo (MD18)
KANAFLEX CORPORATION
Uses a reinforced core of aluminum foil, glass cross, and SPTE. A lightweight and flexible duct for easy stowing, storage, and transportation.A partire da∗ ： 137.79 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Tubo del condotto Condotto in metallo (MD25)
KANAFLEX CORPORATION
[Features]
· Employs a reinforcing core containing a stainless steel plate (SUS304) and specially coated glass cloth.
· Lightweight and flexible ducting which makes storing and transportation easy.
· Specially coated glass cloth which is used is highly elastic and flame resistant.
· Cutting and mounting are easy and piping work can be performed easilyA partire da∗ ： 329.71 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| A partire da∗ |
| Consegna da ： |
| Materiale |
| Uso servizio taglio |
| Proprietà |
| D.I. d(mm) |
| D.E. D(mm) |
| Colore |
| Liquido applicabile |
| Pressione massima ammessa (inferiore alla temperatura ambiente)(MPa) |
|
|
|
|
|
|
| |
| Marchio | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION |
| Serie prodotto | |||||||
| A partire da∗ | - | - | - | - | - | 137.79 € *Prezzo unitario in configurazione base | 329.71 € *Prezzo unitario in configurazione base |
| Consegna da ： | 10 giorni | 56 giorni | 16 giorni | 9 giorni | 16 giorni | 6 giorni | 6 giorni |
| Materiale | Elastomero | Resina olefinica | PVC | PVC | PVC | Alluminio | Vetro di rivestimento speciale |
| Uso servizio taglio | Sì | Sì | Sì | Sì | Sì | No | No |
| Proprietà | Standard / Prestazioni antistatiche / Termoresistenza | Standard / Termoresistenza | Standard | Standard | Standard / Resistenza agli oli | Standard / Proprietà ignifughe | Standard / Proprietà ignifughe |
| D.I. d(mm) | 38.1 ～ 125.9 | 65 ～ 90 | 32.4 ～ 64 | 32.4 ～ 114.3 | 76.4 ～ 203.7 | 51 ～ 101.5 | 51 ～ 126.5 |
| D.E. D(mm) | 44.5 ～ 137 | 71.8 ～ 96.8 | 38.6 ～ 73.2 | 38.6 ～ 125.3 | 86.4 ～ 217.1 | 55 ～ 105.5 | 55 ～ 130.5 |
| Colore | Grigio | Grigio | Grigio | Grigio | Grigio | Grigio | Grigio |
| Liquido applicabile | Aria | Aria | Aria | Aria | Olio per macchinari / Lubrificante / Aria / Nebbia d'olio | Aria | Aria / Scintille |
| Pressione massima ammessa (inferiore alla temperatura ambiente)(MPa) | 0.02 ～ 0.06 | - | 0.04 ～ 0.06 | 0.03 ～ 0.06 | 0.01 ～ 0.04 | 0.007 | 0.007 |
Loading...
Seleziona per:
Limitare la ricerca specificando Spec./Dim.
-
Materiale
- Alluminio
- Vetro di rivestimento speciale
- Acciaio inox
- Polipropilene
- PVC
- Resina olefinica
- EPDM
- Elastomero
- Acciaio
- Altro
- Poliuretano
-
Uso servizio taglio
- Sì
- No
-
Proprietà
- Standard
- Prestazioni antistatiche
- Resistenza all'abrasione
- Resistenza agli oli
- Proprietà ignifughe
- Bassa temperatura Resistenza
- Termoresistenza
- A bassa produzione di particolato
- Flessibilità
- Altro
-
D.I. d(mm)
- 10
- 16.7
- 19.5
- 25
- 25.4
- 25.5
- 31.8
- 32
- 32.4
- 32.5
- 35
- 37.3
- 37.5
- 38
- 38.1
- 39
- 41
- 42.7
- 50
- 50.6
- 50.8
- 50.9
- 51
- 52.5
- 53.0
- 53.5
- 62.4
- 63
- 63.5
- 64
- 65
- 65.5
- 66
- 66.2
- 67
- 67.5
- 68.0
- 70
- 71.0
- 75
- 75.5
- 75.9
- 76
- 76.2
- 76.4
- 76.5
- 78.0
- 79
- 83
- 88.9
- 89
- 89.8
- 90
- 91
- 91.5
- 92
- 97.0
- 98
- 100
- 100.3
- 101.0
- 101.3
- 101.4
- 101.5
- 101.6
- 101.7
- 102
- 102.2
- 102.5
- 103
- 104
- 105
- 109.0
- 113
- 114.3
- 123.0
- 125
- 125.9
- 126
- 126.5
- 127
- 127.3
- 127.5
- 128
- 130
- 131.4
- 145.0
- 150
- 151.4
- 151.7
- 152
- 152.4
- 152.5
- 152.6
- 155
- 165
- 175
- 176.5
- 176.6
- 177.8
- 180
- 200
- 202
- 203.2
- 203.6
- 203.7
- 204.1
- 205
- 208
- 227.0
- 228.6
- 230
- 250
- 252
- 252.1
- 253
- 253.5
- 254
- 257
- 278
- 282
- 300
- 302
- 303
- 303.5
- 307
- 357
- 359.0
- 400
- 408
- 410.0
- 500
- 512.0
-
D.E. D(mm)
- 21.2
- 24
- 28
- 30
- 31.4
- 32.0
- 32.4
- 37
- 38
- 38.6
- 39.2
- 39.5
- 39.8
- 40.0
- 41.5
- 42.0
- 42.6
- 42.9
- 44.5
- 45.0
- 45.4
- 45.8
- 45.9
- 46
- 46.2
- 46.8
- 53.8
- 54.3
- 54.5
- 55.0
- 55.3
- 56
- 56.4
- 56.6
- 57.5
- 57.6
- 57.9
- 58.0
- 58.5
- 59.0
- 59.8
- 59.9
- 60.2
- 61.0
- 61.2
- 61.8
- 69
- 69.5
- 70
- 70.3
- 70.5
- 71
- 71.2
- 71.5
- 71.6
- 71.8
- 72
- 72.6
- 73.0
- 73.2
- 74.7
- 79
- 79.5
- 80
- 80.3
- 80.5
- 81
- 81.5
- 81.8
- 82
- 82.4
- 82.5
- 83.8
- 84.5
- 84.6
- 85
- 85.2
- 85.8
- 85.9
- 86.4
- 86.8
- 87
- 87.2
- 87.6
- 94
- 94.5
- 95
- 95.5
- 96
- 96.8
- 97.4
- 97.7
- 98.2
- 98.6
- 99.0
- 99.3
- 99.5
- 100
- 100.3
- 101.4
- 105
- 105.3
- 105.5
- 106
- 107
- 107.3
- 107.4
- 108
- 109
- 110
- 110.5
- 110.8
- 111.4
- 111.5
- 112
- 112.2
- 113.0
- 114.6
- 118.0
- 119.3
- 125.3
- 125.9
- 129.5
- 130
- 130.3
- 130.5
- 131
- 131.5
- 132
- 133.7
- 134.5
- 135.0
- 137
- 137.2
- 137.3
- 137.5
- 137.6
- 137.7
- 138
- 138.2
- 138.5
- 138.7
- 139.3
- 139.7
- 140.2
- 155
- 155.5
- 155.7
- 157
- 158
- 159
- 160
- 162
- 163.8
- 164
- 164.8
- 165.5
- 166.0
- 166.2
- 167
- 168.8
- 177.8
- 180
- 180.7
- 182.8
- 187.8
- 190.6
- 191.0
- 192.4
- 205
- 205.7
- 208
- 211.0
- 211.5
- 215
- 216.0
- 216.5
- 216.8
- 217.1
- 217.2
- 217.5
- 220
- 223
- 230
- 240.4
- 243.1
- 255
- 255.9
- 256
- 259.5
- 261.0
- 263.9
- 265.7
- 266.2
- 268.5
- 271
- 274.2
- 280
- 292.6
- 305.9
- 306.5
- 307
- 308
- 309.6
- 311
- 316.0
- 316.4
- 318
- 320.0
- 322
- 328.2
- 332
- 357
- 378.5
- 407
- 418.0
- 431.0
- 458
- 520.0
- 532.0
-
Colore
- Nero
- Bianco
- Grigio
- Trasparente
- Avorio
- Marrone scuro
- Rosso
- Colore metallico
-
Liquido applicabile
- Olio per macchinari
- Lubrificante
- Sostanze chimiche
- Polvere
- Granelle
- Aria
- Frammenti di carta
- Scintille
- Nebbia d'olio
-
Pressione massima ammessa (inferiore alla temperatura ambiente)(MPa)
Limitare la ricerca specificando il produttore
-
- MISUMI (0)
- KANAFLEX CORPORATION (7)
- TIGERS POLYMER (7)
- TOTAKU INDUSTRIES (5)
- KURARAYPLASTICS (2)
- KURIMOTO (1)
- COSMOTEC (0)
- ORIENT CORPORATION (0)
- OHTSUKA (0)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Flessibili per condotti
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.