KANEMITSU Profilo flangiato
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
![Giunti albero flessibili SNS tipo a flangia [CL]](//chk0-it.misumi-ec.com/linked/material/mech/INT1/PHOTO/h-j.jpg?$product_view_b$)
Giunti albero flessibili SNS tipo a flangia [CL]
KANEMITSU
JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.
[Features]
· Compliant with JIS B 1452.
· Compatible with nominal diameters of between ø90 and ø630.
· Material FC200A partire da∗ ： 96.64 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Accoppiamenti per alberi flessibili Modello con flangia SNS [SCL]
KANEMITSU
JIS B1452 standard. High reliability due to the high speed rotation and shock resistance. Standardized in nominal diameters of ø112 to ø630. A forged product that uses S35C as the material
[Features]
· Satisfies all of the requirements of a flexible shaft coupling.
· 1. Smoothly transmits the power from the shaft.
· 2. Does not transmit the machine vibration or shaft vibration to the other side.
· 3. Does not release any power (thrust) from pushing the shaft from the shaft coupling.
· 4. The rotary shaft can be turned by hand from the outer side while being directly connected.
· 5. The motor can be operated by itself, and inspection can be performed in the rotating direction by removing the coupling element (coupling bolt) and then rotating each of the machine shafts.
· 6. Can easily measure the state of the direct connection (positional relationship of the two shafts) with the machinery.
· * A simple structure that provides complete flexibility.
· The structure is comprised of a coupler body, coupler bolt, and rubber bushes which make it extremely easy to attach and remove.
· The rubber bushes are made of polymer materials and have flexibility, vibration resistance, and complete flexibility.
· * Has compatibility that is demanded anywhere at anytimeA partire da∗ ： 222.62 € Consegna da ： 9 giorni *Prezzo unitario in configurazione base
-
SNS Giunti albero montati [RCL] modello flangiato
KANEMITSU
JIS B1451 standard. Has the same outer diameter size as the flexible shaft coupling but with a higher transmission capacity, and it can be reliably connected using a bolt. A line up with a nominal diameter of ø112 to ø560, and uses FC200 as the materialA partire da∗ ： 117.55 € Consegna da ： 9 giorni *Prezzo unitario in configurazione base
-
- In Offerta
SNS Giunto per albero flessibile con flangia, Boccole in gomma
KANEMITSU
The rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.- Sconto volumi elevati
A partire da∗ ： 1.68 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Giunto albero flessibile flangiato SNS, parti per giunti
KANEMITSU
The material used for the bolts, nuts, and washer is SS400, and the material for the spring washers is SWRH62, and the rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.A partire da∗ ： 7.31 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Bulloni di accoppiamento albero con montaggio a flangia SNS
KANEMITSU
Il bullone e il dado sono EN 1.0038 Equiv. e la rondella elastica SWRH62.A partire da∗ ： 5.52 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
- In Offerta
SNS Giunti albero flessibili [CL] modello flangiato (montaggio motore laterale)
KANEMITSU
JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.- Sconto volumi elevati
A partire da∗ ： 35.44 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Accoppiamento per albero Flessibile Modello SNS con flangia [CL] (Montaggio della pompa a lato)
KANEMITSU
JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.A partire da∗ ： 36.20 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Giunti albero fissi SNS tipo a flangia [SRCL]
KANEMITSU
Compatible with use in high ranges of circumferential speeds. Standardized in nominal diameters of ø112 to ø355. A forged product that uses S35C as the materialA partire da∗ ： 297.76 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
SNS Giunti albero flessibili [SCL] modello flangiato (montaggio pompa laterale)
KANEMITSU
JIS B1452 standard. High reliability due to the high speed rotation and shock resistance. Standardized in nominal diameters of ø112 to ø630. A forged product that uses S35C as the material
[Features]
· Satisfies all of the requirements of a flexible shaft coupling.
· Smoothly transmits the power from the shaft.
· Does not transmit the machine vibration or shaft vibration to the other side.
· Does not release any power (thrust) from pushing the shaft from the shaft coupling.
· The rotary shaft can be turned by hand from the outer side while being directly connected.
· The motor can be operated by itself, and inspection can be performed in the rotating direction by removing the coupling element (coupling bolt) and then rotating each of the machine shafts.
· Can easily measure the state of the direct connection (positional relationship of the two shafts) with the machinery.A partire da∗ ： 104.63 € Consegna da ： 9 giorni *Prezzo unitario in configurazione base
-
A partire da∗ ： 31.62 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
STB Boccola 4225
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.A partire da∗ ： 34.36 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
A partire da∗ ： 46.30 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
STB Boccola 6340
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.A partire da∗ ： 67.88 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
A partire da∗ ： 84.72 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
STB Boccola 11055
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.A partire da∗ ： 104.13 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
STB boccola 11080
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
· Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
· The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Can be used without a key with light loads. Does not require a cover or set screw.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type used in the US and Europe.·A partire da∗ ： 120.72 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
Boccole STB 13070
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.A partire da∗ ： 188.19 € Consegna da ： 10 giorni *Prezzo unitario in configurazione base
-
STB Boccola 14090
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.A partire da∗ ： 293.16 € Consegna da ： 9 giorni *Prezzo unitario in configurazione base
![Giunti albero flessibili SNS tipo a flangia [CL]](http://chk0-it.misumi-ec.com/linked/material/mech/INT1/PHOTO/h-j.jpg?$product_view_b$)
| Marchio |
|---|
| Serie prodotto |
| A partire da∗ |
| Consegna da ： |
| Gamma coppia ammessa(N▪m) |
| Gamma di rotazioni massima(r/min) |
| Diametro esterno A(φ) |
| Lunghezza totale W(mm) |
| Caratteristiche |
| Materiale corpo principale |
| Tipo |
| Coppia ammessa(N▪m) |
| Numero massimo di rotazioni(r/min) |
| Gamma di disallineamenti laterali ammessa(mm) |
| Disallineamento laterale ammesso(mm) |
| Disallineamento angolare ammesso(gradi) |
| Applicazione |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU |
| Serie prodotto | Accoppiamenti per alberi flessibili Modello con flangia SNS [SCL] | SNS Giunto per albero flessibile con flangia, Boccole in gomma | SNS Giunti albero flessibili [CL] modello flangiato (montaggio motore laterale) | Accoppiamento per albero Flessibile Modello SNS con flangia [CL] (Montaggio della pompa a lato) | SNS Giunti albero flessibili [SCL] modello flangiato (montaggio pompa laterale) | ||||||||||||||
| A partire da∗ | 96.64 € *Prezzo unitario in configurazione base | 222.62 € *Prezzo unitario in configurazione base | 117.55 € *Prezzo unitario in configurazione base | 1.68 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 7.31 € *Prezzo unitario in configurazione base | 5.52 € *Prezzo unitario in configurazione base | 35.44 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 36.20 € *Prezzo unitario in configurazione base | 297.76 € *Prezzo unitario in configurazione base | 104.63 € *Prezzo unitario in configurazione base | 31.62 € *Prezzo unitario in configurazione base | 34.36 € *Prezzo unitario in configurazione base | 46.30 € *Prezzo unitario in configurazione base | 67.88 € *Prezzo unitario in configurazione base | 84.72 € *Prezzo unitario in configurazione base | 104.13 € *Prezzo unitario in configurazione base | 120.72 € *Prezzo unitario in configurazione base | 188.19 € *Prezzo unitario in configurazione base | 293.16 € *Prezzo unitario in configurazione base |
| Consegna da ： | 6 giorni | 9 giorni | 9 giorni | Stesso giorno | 6 giorni | 10 giorni | Stesso giorno | 6 giorni | 10 giorni | 9 giorni | 6 giorni | 6 giorni | 10 giorni | 10 giorni | 10 giorni | 10 giorni | 10 giorni | 10 giorni | 9 giorni |
| Gamma coppia ammessa(N▪m) | 3.01–5.00 / 5.01–10.00 / 10.01–20.00 / 20.01–50.00 / 100–inf. a 500 / 500–inf. a 1.000 / 1000–inf. a 5000 / 5.000–inf. a 10.000 / 10.000–inf. a 20.000 | 10.01–20.00 / 20.01–50.00 / 100–inf. a 500 / 500–inf. a 1.000 / 1000–inf. a 5000 / 5.000–inf. a 10.000 / 10.000–inf. a 20.000 | 50.01–100.00 / 100–inf. a 500 / 500–inf. a 1.000 / 1000–inf. a 5000 / 5.000–inf. a 10.000 / 10.000–inf. a 20.000 / 20.000–inf. a 50.000 | - | - | - | 20.01–50.00 / 5.000–inf. a 10.000 | 3.01–5.00 / 20.01–50.00 / 100–inf. a 500 / 500–inf. a 1.000 / 1000–inf. a 5000 / 5.000–inf. a 10.000 / 10.000–inf. a 20.000 | 50.01–100.00 / 100–inf. a 500 / 500–inf. a 1.000 / 1000–inf. a 5000 | 10.01–20.00 / 20.01–50.00 / 100–inf. a 500 / 500–inf. a 1.000 / 1000–inf. a 5000 / 5.000–inf. a 10.000 / 10.000–inf. a 20.000 | - | - | - | - | - | - | - | - | - |
| Gamma di rotazioni massima(r/min) | 301–1,000 / 1,001–2,000 / 2001–4,000 | 1,001–2,000 / 2001–4,000 / 4,001–10,000 | 1,001–2,000 / 2001–4,000 | - | - | - | 1,001–2,000 / 2001–4,000 | 301–1,000 / 1,001–2,000 / 2001–4,000 | 2001–4,000 / 4,001–10,000 | 1,001–2,000 / 2001–4,000 / 4,001–10,000 | - | - | - | - | - | - | - | - | - |
| Diametro esterno A(φ) | 90 ～ 630 | 112 ～ 630 | 112 ～ 560 | - | - | - | 125 ～ 560 | 90 ～ 630 | 112 ～ 355 | 112 ～ 630 | - | - | - | - | - | - | - | - | - |
| Lunghezza totale W(mm) | 59 ～ 365 | 83 ～ 365 | 80 ～ 500 | - | - | - | 45 ～ 160 | 28 ～ 180 | 80 ～ 250 | 40 ～ 180 | - | - | - | - | - | - | - | - | - |
| Caratteristiche | Foro albero non rifinito | Foro albero non rifinito | Foro albero non rifinito | - | - | - | Foro albero non rifinito | Foro albero non rifinito | Foro albero non rifinito | Foro albero non rifinito | - | - | - | - | - | - | - | - | - |
| Materiale corpo principale | Acciaio | - | Acciaio | Resina | Acciaio | Acciaio | Acciaio | Acciaio | - | - | Acciaio | Acciaio | Acciaio | Acciaio | Acciaio | Acciaio | Acciaio | Acciaio | Acciaio |
| Tipo | Corpo principale | Corpo principale | Corpo principale | Componenti correlati | Componenti correlati | Componenti correlati | Corpo principale | Corpo principale | Corpo principale | Corpo principale | Componenti correlati | Componenti correlati | Componenti correlati | Componenti correlati | Componenti correlati | Componenti correlati | Componenti correlati | Componenti correlati | Componenti correlati |
| Coppia ammessa(N▪m) | 3.9 ～ 15680 | 15.7 ～ 15680 | 61.7 ～ 30870 | - | - | - | 24.5 ～ 9803.9 | 3.9 ～ 15686.3 | 78.4 ～ 4902 | 15.7 ～ 15686.3 | - | - | - | - | - | - | - | - | - |
| Numero massimo di rotazioni(r/min) | 1000 ～ 4000 | 1500 ～ 6000 | 1100 ～ 4000 | - | - | - | 1150 ～ 4000 | 1000 ～ 4000 | 3000 ～ 6000 | 1500 ～ 6000 | - | - | - | - | - | - | - | - | - |
| Gamma di disallineamenti laterali ammessa(mm) | 0.02–0.2 | 0.02–0.2 | 0.02–0.2 | - | - | - | - | - | 0.02–0.2 | - | - | - | - | - | - | - | - | - | - |
| Disallineamento laterale ammesso(mm) | 0.05 ～ 0.1 | 0.05 ～ 0.1 | 0.05 ～ 0.1 | - | - | - | - | - | 0.05 | - | - | - | - | - | - | - | - | - | - |
| Disallineamento angolare ammesso(gradi) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicazione | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
![Giunti albero flessibili SNS tipo a flangia [CL]](http://chk0-it.misumi-ec.com/linked/material/mech/INT1/PHOTO/h-j.jpg?$product_view_c$)
Loading...
Seleziona per:
Stock
-
- Stock Items Included
Limitare la ricerca specificando Spec./Dim.
-
Gamma coppia ammessa(N▪m)
-
Gamma di rotazioni massima(r/min)
-
Diametro esterno A(φ)
-
Lunghezza totale W(mm)
-
Caratteristiche
- Assorbimento delle vibrazioni
- Foro albero non rifinito
-
Materiale corpo principale
-
Tipo
-
Coppia ammessa(N▪m)
-
Numero massimo di rotazioni(r/min)
-
Gamma di disallineamenti laterali ammessa(mm)
-
Disallineamento laterale ammesso(mm)
-
Disallineamento angolare ammesso(gradi)
-
Applicazione
Limitare la ricerca specificando il produttore
-
- KANEMITSU (19)
- NABEYA BI-TECH (2)
- KAYSEVEN (1)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Profilo flangiato
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.