Guide lineari standard（Kit/Articolo singolo：Kit pagina 2）

?* Informazioni su tempi di consegna e prezzi

• 

  Guide profilate / carrello corto / EGS-S

  OZAK

  [Features]
  · Comes standard equipped with a side seal to improve the dust-proofing performance. You can expect longer life expectancy out of this product due its ability to even further prevent foreign object infiltration.
  · Can achieve weight reduction for the rail by revising the height and cross-section shape.
  · The lubricant performance has been improved beyond that of conventional products by revising the grease supply path and using a design that allows grease to accumulate in the ball circulation path.
  · Equipped with complete compatibility for fitting the bearing with the rail. Can achieve reduced assembly times.
  · No need to fret because the balls included in the bearings have a structure that will not allow them to fall out.
  · We have standardized the rail length in order to be able to support all rail lengths and to have a symmetrical mount hole pitch location.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	13 giorni

• 

  Guide profilate / carrello largo, carrello extra largo / SBI-FL, SBI-FLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	10 giorni

• 

  Sistemi di guida monorotaia in miniatura / tipo di guida selezionabile / dimensioni del carrello selezionabili / materiale selezionabile / rivestimento LTBC

  MISUMI

  • Quantità d'ordine aumentate (D-JIT)

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	9 giorni

• 

  Guide profilate / dimensioni del carrello selezionabili / protezione dalla polvere

  MISUMI

  • Quantità d'ordine aumentate (D-JIT)

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	7 giorni

• 

  Guide profilate / dimensioni del carrello selezionabili / struttura per impieghi gravosi, protezione dalla polvere

  MISUMI

  • Quantità d'ordine aumentate (D-JIT)

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	7 giorni

• 

  Guide profilate / dimensioni del carrello selezionabili

  MISUMI

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	9 giorni

• 

  Guide profilate / dimensioni del carrello selezionabili / versione estremamente robusta

  MISUMI

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	9 giorni

• 

  Guida LM con sistema a ricircolo di sfere con fermo, corsa limitata, EPF

  THK

  A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	25 giorni

• 

  Guida LM con sistema a ricircolo di sfere completo, radiale, SR-M1

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	40 giorni

• 

  Sistema a ricircolo di sfere con guida LM, miniaturizzata, SRS

  THK

  A best selling THK product. The SRS series is designed for installation to locations in which space is at a premium.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	8 giorni

• 

  Guide profilate in miniatura / tipo di guida selezionabile / dimensioni del carrello selezionabili / SRS-G

  THK

  A full-ball type with not ball retainer on the SRS type.
  
  [Features]
  · The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
  · The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
  · The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
  · The LM block and LM rail both use stainless steel that are highly rust-proof.
  · The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
  · This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	20 giorni

• 

  Guide profilate in miniatura / guida larga / EGM-W, EGM-WL

  OZAK

  [Features]
  · All of the parts are comprised of either stainless steel or plastic, which makes this ideal for use in environments that do not tolerate rust.
  · Can achieve reduced weight and the most compact design allowable, which is ideal for high speed operation.
  · The ball rolling surface has been designed into a gothic arch shape that can withstand a high load capacity, which can sustain a long life.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	17 giorni

• 

  Guida LM a sfera piena, tipo radiale, tipo SR

  THK

  [Caratteristiche]
  ·Un tipo compatto con altezza ridotta della sezione trasversale, ideale per guide orizzontali grazie alla struttura di contatto a sfera resistente ai carichi in direzione radiale
  ·Poiché si tratta di un tipo di regolazione automatico in grado di assorbire ragionevolmente il parallelismo dei 2 assi e l’errore di precisione del livello, è possibile ottenere un’elevata precisione e movimenti lisci
  ·La parte di ritorno di ciascuna fila di sfere è progettata in modo tale che le sfere dei cuscinetti circolino uniformemente dalla parte guida della piastra terminale, in modo da ottenere un movimento rotatorio con un leggero rumore
  ·Anche rispetto al pre-carico e al carico eccentrico, lo scorrimento differenziale della sfera è ridotto, ha un’eccellente resistenza all’abrasione ed è possibile mantenere la precisione per un lungo periodo di tempo
  ·I blocchi LM, le rotaie LM e le sfere dei cuscinetti possono essere maneggiati con acciaio inox
  ·Anche se il blocco LM viene estratto dalla rotaia LM, la sfera è trattenuta dal piatto di supporto e non cadrà

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	8 giorni

• 

  Guide profilate / carrello lungo / struttura estremamente pesante

  MISUMI

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	7 giorni

• 

  Guida LM con sistema a ricircolo di sfere completo, elevata resistenza alle alte temperature in conformità con gli standard internazionali, HSR-M1

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
  · The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
  · Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
  · A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
  · The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
  · Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	55 giorni

• 

  * Sistema a ricircolo di sfere completo conforme ai nuovi standard [3 / 5 giorni di spedizione] con guida LM conforme agli standard mondiali, modello HSR

  THK

  A best selling THK product. The HSR series can be used in any position.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	8 giorni

• 

  Sistemi di guida monorotaia in miniatura / dimensioni del carrello selezionabili / acciaio inox / EGM, EGM-L

  OZAK

  [Features]
  · All of the parts are comprised of either stainless steel or plastic, which makes this ideal for use in environments that do not tolerate rust.
  · Can achieve reduced weight and the most compact design allowable, which is ideal for high speed operation.
  · The ball rolling surface has been designed into a gothic arch shape that can withstand a high load capacity, which can sustain a long life.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	17 giorni

• 

  Guide profilate / EGS

  OZAK

  [Features]
  · Comes standard equipped with a side seal to improve the dust-proofing performance. You can expect longer life expectancy out of this product due its ability to even further prevent foreign object infiltration.
  · Can achieve weight reduction for the rail by revising the height and cross-section shape.
  · The lubricant performance has been improved beyond that of conventional products by revising the grease supply path and using a design that allows grease to accumulate in the ball circulation path.
  · Equipped with complete compatibility for fitting the bearing with the rail. Can achieve reduced assembly times.
  · No need to fret because the balls included in the bearings have a structure that will not allow them to fall out.
  · We have standardized the rail length in order to be able to support all rail lengths and to have a symmetrical mount hole pitch location.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	17 giorni

• 

  Guide profilate / carrello alto / EGH, EGH-L

  OZAK

  [Features]
  · Comes standard equipped with a side seal to improve the dust-proofing performance. You can expect longer life expectancy out of this product due its ability to even further prevent foreign object infiltration.
  · Can achieve weight reduction for the rail by revising the height and cross-section shape.
  · The lubricant performance has been improved beyond that of conventional products by revising the grease supply path and using a design that allows grease to accumulate in the ball circulation path.
  · Equipped with complete compatibility for fitting the bearing with the rail. Can achieve reduced assembly times.
  · No need to fret because the balls included in the bearings have a structure that will not allow them to fall out.
  · We have standardized the rail length in order to be able to support all rail lengths and to have a symmetrical mount hole pitch location.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	16 giorni

• 

  Guide profilate / carrello largo / EGH-F, EGH-FL

  OZAK

  [Features]
  · Comes standard equipped with a side seal to improve the dust-proofing performance. You can expect longer life expectancy out of this product due its ability to even further prevent foreign object infiltration.
  · Can achieve weight reduction for the rail by revising the height and cross-section shape.
  · The lubricant performance has been improved beyond that of conventional products by revising the grease supply path and using a design that allows grease to accumulate in the ball circulation path.
  · Equipped with complete compatibility for fitting the bearing with the rail. Can achieve reduced assembly times.
  · No need to fret because the balls included in the bearings have a structure that will not allow them to fall out.
  · We have standardized the rail length in order to be able to support all rail lengths and to have a symmetrical mount hole pitch location.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	16 giorni

• 

  Guide profilate / carrello lungo / SBI-HL, SBI-HLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	10 giorni

• 

  Guide profilate / carrello lungo / SBI-CL, SBI-CLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	10 giorni

• 

  Guide profilate / carrello piccolo / SBI-SV

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	10 giorni

Loading...