Cerniere（Ambiente d'esercizio：Standard）

?* Informazioni su tempi di consegna e prezzi

• 

  Cerniere a coppia / zinco / serie FHD-A1 / FUJI LATEX

  FUJI LATEX

  As this damper is in the shape of a hinge, it is easy to install and corresponds to both opening direction and closing direction. In addition, it can not be used for vertical use.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	73.81 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatori rotanti / TD75 / TOK BEARING

  TOK BEARING

  [Features]
  · outer diameter ø11 with maximum torque 0.29N/m (3kgf/ cm) achieved.
  · Slim (small and lightweight) 180° open/close type.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.77 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / serie A / ACCURATE

  ACCURATE

  Grease-less high performance free stop hinge using the friction principle of resin and metal.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	10.75 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatori rotanti / flangiata / unidirezionale / FFD-25FS / FW / SS / serie SW / FUJI LATEX

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	16.39 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / flangiata / bidirezionale / serie FRT-E2 / E9 / FUJI LATEX

  FUJI LATEX

  This damper is a low cost, compact and thin geared rotary damper, and it can be installed in a space-saving manner.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.81 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FRT / FRN-K2 / FUJI LATEX

  FUJI LATEX

  High torque rotary damper that is easy to install. Available in both types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · Velocity characteristics: The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · Temperature characteristics: The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	29.57 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Cerniere / non forate / saldabili / laminate / acciaio inox / lucide / THS08xxxx, THS15xxxx / TRUSCO NAKAYAMA

  TRUSCO NAKAYAMA

  [Applicazioni] Cerniere per quadri elettrici, quadri di distribuzione, macchine utensili, veicoli, ecc.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	11.84 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FDT-47A / FDN-47A / FUJI LATEX

  FUJI LATEX

  This disc damper has high torque, a thin, space saving shape, and its appearance is metallic. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · The torque of the disc damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · The viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal the torque also returns to the original value

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	19.52 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / flangiata / unidirezionale / serie FRN-P2 / FUJI LATEX

  FUJI LATEX

  This damper is a unidirectional rotary damper with adjustable torque. Also, the gears attached to the damper are available in 2 types.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal, the torque also returns to its original value

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	38.52 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FRT / FRN-F2 / FUJI LATEX

  FUJI LATEX

  [Features]
  · High torque rotary damper that is easy to install.
  · Available in both types of torque, one that works in both directions and the other in one direction.
  · FRT Is a fixed shaft type.
  · The axis of FRN is not fixed.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	29.86 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatori rotanti / flangiata / unidirezionale / serie FYN-D3 / FUJI LATEX

  FUJI LATEX

  This damper is a high torque type metal (zinc die cast) oscillating damper. Moreover, it has a wide operating range, with 180° of operation angle.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	39.34 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatore rotante / flangiato / bidirezionale / TD102 / TOK BEARING

  TOK BEARING

  [Features]
  · Ultra-compact, ultra-thin damper.
  · Bidirectional endless damper.
  · Small standard shape.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.35 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere a più snodi / svasature cilindriche / 2 assi / 104°, 194°, 210° / acciaio inox / FB-1736 / TAKIGEN

  TAKIGEN

  [Features]
  · The door can be tightened horizontally up to about 10 mm by a 2-axis mechanism (tightening mechanism is required).
  · Dry bearing (phosphor bronze) is used for the bearing part.
  · Fine adjustment of door gasket and tightening O-ring is possible with adjustment screw.
  · Made of stainless steel, corrosion resistant

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	112.84 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere a molla piatta / bidirezionali / acciaio per molle / ST0xxAx / ACCURATE

  ACCURATE

  Space-saving hinge compatible with thinning of products. Torque difference is realized by the curling direction of leaf spring.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	10.60 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FDT-70A / FDN-70A / FUJI LATEX

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · The torque of the disc damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · The viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal the torque also returns to the original value

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	25.35 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FRT / FRN-C2 / FUJI LATEX

  FUJI LATEX

  This small damper is available in 2 types of torque, one that works in both directions and the other in one direction. We also offer both types with and without gear.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.63 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FRT / FRN-D2 / FUJI LATEX

  FUJI LATEX

  This small damper is available in 2 types of torque, one that works in both directions and the other in one direction. We also offer both types with and without gear.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	9.06 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / flangiata / unidirezionale / serie FYN-K1 / FUJI LATEX

  FUJI LATEX

  This damper is a high-torque resin oscillating damper with unidirectional characteristics. Also, it is easy to install.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	17.90 €
  Consegna da ：	93 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatori rotanti / unidirezionale / serie FYN-U1 / FUJI LATEX

  FUJI LATEX

  This damper is a unidirectional metal (zinc die-cast) oscillating damper that has high torque performance with an outer diameter of ø16 mm.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	13.24 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / flangiato / TD42 / TOK BEARING

  TOK BEARING

  Excellent response quality. Maximum 8.83N/m torque allowed. Note: The CAD data for this series is being corrected. Please wait for a while until the correction is completed.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	38.24 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / TD73 / TOK BEARING

  TOK BEARING

  [Features]
  · Smallest diameter damper by the manufacturer (about 2/3 of conventional products).
  · Slim and ultra-compact shape with outer diameter ø 11 [mm] (manufacturer's smallest diameter damper), housing length 22 [mm], maximum torque 0.29N/m (3kgf/ cm) achieved.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.05 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Smorzatore rotante / forma flangiata / TD88 / TOK BEARING

  TOK BEARING

  Monouso, compatto e resistente. Tipo di corpo principale Tipo di rotazione, Ambiente di funzionamento Standard, Materiale del corpo principale Resina, Funzione aggiuntiva Con ammortizzatore, Angolo di apertura θ (deg) 360, Metodo di montaggio Montaggio a vite, Tipo di foro della vite di montaggio Foro rotondo.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	9.18 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere a coppia / resistenza regolabile / POM / BP-150-1 / TAKIGEN

  TAKIGEN

  Hold the door at an arbitrary angle. Can change the tightness of the torque by turning the adjustment bolt.
  Made from flame retardant materials.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.89 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / esagonale / BP-879 / TAKIGEN

  TAKIGEN

  [Features]
  · Appropriate damper characteristics can be obtained within the rotation range (in the direction of the arrow) of 180° (rotation in the reverse direction of the arrow is no load).
  · Due to the compact hexagonal shape, setting it into the door is easy.
  · Damper characteristics: closing time 10 ± 5 seconds.
  · In a tolerance test of 100,000 repetitions (at normal temperature), closing time is more than 2.5 seconds.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	11.97 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte / svasature coniche / acciaio inox / TRUSCO NAKAYAMA

  TRUSCO NAKAYAMA

  Cerniera piatta in acciaio inox per impieghi gravosi. [Materiale] Acciaio inox (EN 1.4401 Equiv.)

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	68.69 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere a bandiera / non forate / saldabili / laminate / acciaio / 2000W / TRUSCO NAKAYAMA【2-4 Pezzi per confezione】

  TRUSCO NAKAYAMA

  Cerniera in acciaio saldato di spessore extra (EN 1.0320 Equiv. (laminato a caldo)). [Trattamento superficiale del corpo principale]Finitura di base del materiale

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	22.02 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Cerniere piatte / non forate / saldabili / laminate / in acciaio / grezze / TRUSCO NAKAYAMA【2-4 Pezzi per confezione】

  TRUSCO NAKAYAMA

  Cerniera speciale in acciaio saldato ad alto spessore. [Materiali]Acciaio (EN 1.0320 Equiv. (laminato a caldo))

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	14.77 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Cerniere a cerniera / non forate / laminate / acciaio / cromate lucide / THN10xxxx, THN16xxxx / TRUSCO NAKAYAMA

  TRUSCO NAKAYAMA

  [Applicazioni] Cerniere per quadri elettrici, pannelli di distribuzione, macchine utensili, veicoli, ecc.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	9.76 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FDT-57A / FDN-57A / FUJI LATEX

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	20.58 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FDT-63A / FDN-63A / FUJI LATEX

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · Velocity characteristics.
  · The torque of the disc damper changes according to the rotation speed.
  · As per the figure below, generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · Temperature characteristics.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal, the torque also returns to its original value.
  · Temperature characteristics graph is as shown in the figure

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	25.15 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatori rotanti / tipo a flangia / unidirezionale / FFD-28FS / FW / SS / serie SW / FUJI LATEX

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	16.40 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / unidirezionale / serie FFD-30FS / FW / SS / SW / FUJI LATEX

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	16.42 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cerniere a coppia / bidirezionali / alluminio / FHD-B1 / serie B2 / FUJI LATEX

  FUJI LATEX

  This damper is a friction type damper in the shape of a hinge. Easy to install, and torque is applied both in the opening direction and closing direction.
  
  [Features]
  · Damper characteristics vary with the operating environment temperatures. The damper characteristics become weaker as the temperature rises, and becomes stronger as the temperature decreases.
  · This is because the shaft bush inside the damper changes as an effect of the temperature, and if the temperature returns to normal, the damper characteristics return to normal as well

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	15.33 €
  Consegna da ：	34 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Telaio / FRN-P2 / FUJI LATEX

  FUJI LATEX

  This option is a FRN-P2 series G1 gear dedicated rack gear.
  
  [Features]
  · Speed characteristics
  · The torque of the rotary damper changes according to the rotation speed.
  · In general, as shown in the figure on the right, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · In addition, the torque at startup is slightly different from the rated torque.
  · Temperature characteristics
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, as shown in the figure on the right, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change, hence if the temperature returns to original, the torque returns to the original.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.21 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatore rotante / a flangia / bidirezionale / serie FRT-G2 / FUJI LATEX

  FUJI LATEX

  This damper is a low cost, compact and thin rotary damper. We also have 3 types of geared and non-geared types available.
  
  [Features]
  · Velocity characteristics: The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · Temperature characteristics: The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  • Sconto volumi elevati

  • Stock

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.81 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / flangiata / bidirezionale / serie FRT-L1 / FUJI LATEX

  FUJI LATEX

  This rotary damper is small yet the torque is high, with a flange that makes installation easier.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	12.06 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / bidirezionali / serie FRT-N1 / FUJI LATEX

  FUJI LATEX

  This rotary damper is small yet the torque is high, with a flange that makes installation easier.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	7.30 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / bidirezionale / serie FRT-S1 / FUJI LATEX

  FUJI LATEX

  This damper is a small diameter rotary damper of space-saving type, with a cylindrical shape and a resin outer diameter ø9.5 mm.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.50 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatori rotanti / flangiata / unidirezionale / serie FYN-M1 / FUJI LATEX

  FUJI LATEX

  The torque of this type of damper is strong at the beginning of movement, and becomes weak at the end. This oscillating damper works well with a light door like the flap door on a vending machine.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	6.61 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / unidirezionale / serie FYN-P1 / FUJI LATEX

  FUJI LATEX

  This damper is unidirectional resin oscillating damper that has a high torque performance while being compact at ø18.5 mm in outer shape.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	9.49 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / tipo a flangia / unidirezionale / serie FYN-S1 / FUJI LATEX

  FUJI LATEX

  This damper is a high-torque type metal (zinc die-cast) oscillating damper. In addition, even if the load changes, the same kind of movement is achieved due to the self-adjusting characteristics.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	39.37 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FYT / FYN-D1 (D2) / FUJI LATEX

  FUJI LATEX

  This damper is a high-torque type metal (zinc die-cast) oscillating damper. In addition, there are 2 types of characteristics, unidirectional and bi-directional.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	30.61 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FYT / FYN-H1 (H2) / FUJI LATEX

  FUJI LATEX

  This damper is a metal (zinc die-cast) oscillating damper that can adjust characteristics, with high torque. In addition, there are 2 types of characteristics, unidirectional and bi-directional.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	33.52 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Smorzatori rotanti / tipo a flangia / bidirezionale, unidirezionale / serie FYT / FYN-LA3 / FUJI LATEX

  FUJI LATEX

  This is an adjustable metal (zinc die-cast) oscillating damper that can accommodate a wide damping constant. Also, there are 2 types of characteristics, one-directional and bidirectional.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	190.45 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Smorzatore di rotazione / TD14 / TOK BEARING

  TOK BEARING

  Dimostra una vivace discesa in solitaria. Tipo di corpo principale Tipo rotante, Ambiente di funzionamento, Standard, Materiale del corpo principale Resina, Funzione aggiuntiva Con serranda, Angolo di apertura θ (gradi) 110.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	12.94 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

Loading...